All MIBs › DKSF-70-3-X-X-1 › npCurLoopI
npCurLoopI
Module: DKSF-70-3-X-X-1
OID (symbolic): DKSF-70-3-X-X-1::npCurLoopI
OID (numeric): 1.3.6.1.4.1.25728.8300.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Loop current, mA
What is npCurLoopI?
This read-only INTEGER (0-99999) reports the measured current flowing in a 4-20mA current loop, in milliamps. An admin reads this to get the sensor's actual process value, since 4-20mA loop sensors encode a measurement (like pressure or level) as a proportional current.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.3 snmpwalk -v2c -c public <target> DKSF-70-3-X-X-1::npCurLoopI
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.3.1 snmpget -v2c -c public <target> DKSF-70-3-X-X-1::npCurLoopI.1
Start monitoring NetPing DKSF-70 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-3-X-X-1::npCurLoopI OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1 | npCurLoopTable | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1.1 | npCurLoopEntry | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.1.1.3 | npCurLoopI | DKSF-70-3-X-X-1 |