All MIBs › DKSF-60-4-X-X-X › npCurLoopStatus
npCurLoopStatus
Module: DKSF-60-4-X-X-X
OID (symbolic): DKSF-60-4-X-X-X::npCurLoopStatus
OID (numeric): 1.3.6.1.4.1.25728.8300.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered
What is npCurLoopStatus?
This read-only INTEGER reports the health of a 4-20mA current-loop sensor circuit: ok(0) is normal, alert(1) means the reading is out of the expected range, and cut(2)/short(3)/notPowered(4) flag wiring or power faults. An admin alerts on cut(2) or short(3) to catch a broken sensor cable before it causes missing readings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.2 snmpwalk -v2c -c public <target> DKSF-60-4-X-X-X::npCurLoopStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.2.1 snmpget -v2c -c public <target> DKSF-60-4-X-X-X::npCurLoopStatus.1
Start monitoring NetPing DKSF-60 remote power/relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-60-4-X-X-X::npCurLoopStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-60 remote power/relay control unit from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1 | npCurLoopTable | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1.1 | npCurLoopEntry | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.1.1.2 | npCurLoopStatus | DKSF-60-4-X-X-X |