DKSF-50-11-X-X-X :: npCurLoopPower

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDKSF-50-11-X-X-XnpCurLoopPower

npCurLoopPower

Module: DKSF-50-11-X-X-X

OID (symbolic): DKSF-50-11-X-X-X::npCurLoopPower

OID (numeric): 1.3.6.1.4.1.25728.8300.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Control of loop power 0=Off, 1=On, 2=reset by off/on power

What is npCurLoopPower?

Write off(0), on(1), or cyclePower(2) here to control power to the loop-powered sensor on this channel; cyclePower(2) turns it off then on again as a remote reset. Use cyclePower(2) to remotely power-cycle a hung 4-20mA transmitter without visiting the site.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.7
snmpwalk -v2c -c public <target> DKSF-50-11-X-X-X::npCurLoopPower

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.7.1
snmpget -v2c -c public <target> DKSF-50-11-X-X-X::npCurLoopPower.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8300.1.1.7.1 i <value>

Start monitoring Alentis Electronics NetPing remote sensing/control device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-50-11-X-X-X::npCurLoopPower OID value, configure state conditions and alerts, and monitor any Alentis Electronics NetPing remote sensing/control device from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25728lightcomDKSF-201-9-X-X-1
Numeric OIDNameModule
1.3.6.1.4.1.25728.8300npCurLoopDKSF-50-11-X-X-X
1.3.6.1.4.1.25728.8300.1npCurLoopTableDKSF-50-11-X-X-X
1.3.6.1.4.1.25728.8300.1.1npCurLoopEntryDKSF-50-11-X-X-X
1.3.6.1.4.1.25728.8300.1.1.7npCurLoopPowerDKSF-50-11-X-X-X