All MIBs › DKSF-50-11-X-X-X › npCurLoopN
npCurLoopN
Module: DKSF-50-11-X-X-X
OID (symbolic): DKSF-50-11-X-X-X::npCurLoopN
OID (numeric): 1.3.6.1.4.1.25728.8300.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Index of current loop, 1 to max supported
What is npCurLoopN?
This is the index (1 through 8) identifying which 4-20mA current-loop sensor input a row in the loop table describes. Use it to match a specific loop-powered sensor to its status, current, voltage and resistance readings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.1 snmpwalk -v2c -c public <target> DKSF-50-11-X-X-X::npCurLoopN
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.1.1.1.1 snmpget -v2c -c public <target> DKSF-50-11-X-X-X::npCurLoopN.1
Start monitoring Alentis Electronics NetPing remote sensing/control device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-50-11-X-X-X::npCurLoopN OID value, configure state conditions and alerts, and monitor any Alentis Electronics NetPing remote sensing/control device from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1 | npCurLoopTable | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1.1 | npCurLoopEntry | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.1.1.1 | npCurLoopN | DKSF-50-11-X-X-X |