All MIBs › DGS3120-24SC-DC-LED-MIB
Organization: D-Link Corp.
Last Updated: 2011-06-10
Description: MIB for monitoring front-panel LED status on D-Link DGS-3120-24SC-DC switches, covering per-unit port link and speed indicators
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DGS3120-24SC-DC-LED-MIB?
This proprietary D-Link MIB monitors front-panel LED status on the DGS-3120-24SC-DC, a DC-powered SFP switch, exposing per-unit port link and speed indicator states as represented on the switch's physical LED panel. Unlike typical switch MIBs, its data is entirely about the visual/hardware indicator layer rather than configuration or traffic counters. Its monitoring value is specifically hardware-status oriented: it lets a management system remotely mirror what a technician would otherwise have to check by physically looking at the switch's front panel, such as per-port link/speed LED state, useful in unattended DC-powered telecom/central-office deployments where physical access is limited. It is a proprietary extension specific to D-Link stacking/LED conventions rather than tied to an IETF standard, and typically complements IF-MIB's link-state data with the hardware-indicator view. It is deployed on DGS-3120-24SC-DC switches in telecom central offices or other DC-powered facilities where remote visibility into physical LED indicators reduces the need for on-site inspection. Engineers can download the DGS3120-24SC-DC-LED-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DGS3120-24SC-DC-LED-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DGS-3120-24SC-DC DC-powered switch
Monitoring Examples
No sample object or table names were provided for this module in the available excerpt, so a specific OID walk cannot be shown. Conceptually an operator would poll a per-port LED-status table (following a *LedTable/*LedEntry naming convention) to remotely confirm whether a port's link/speed LED indicates an active Gigabit link, which would otherwise require physically viewing the switch's front panel in a DC-powered facility. This is inferred from the module's stated purpose since sample_objects were not provided.
What Can Be Monitored
- per-port link LED status
- per-port speed LED indicator
- front-panel LED state
Imported Objects
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SWDGS3120PRIMGMT-MIB
| dlink-Dgs3120Proj-Dgs3120-24SC-DC |
OIDs
RFC description
D-Link DGS3120 switch LED indicator information MIB for monitoring front panel LED status.
Start monitoring D-Link DGS-3120-24SC-DC DC-powered switch (LED status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.