All MIBs › SWDGS3120PRIMGMT-MIB
Category: Switch Management - D-Link
Description:
Manages primary configuration and operational objects specific to the D-Link DGS-3120 switch.
Imported Objects
From DLINK-ID-REC-MIB
| dlink-mgmt | |
| dlink-products |
From SNMPv2-SMI
| MODULE-IDENTITY |
What Is SWDGS3120PRIMGMT-MIB?
The SWDGS3120PRIMGMT-MIB MIB is a D-Link private MIB providing primary configuration and operational management objects for the DGS-3120 series gigabit Ethernet switches, used in enterprise and campus network access/aggregation layers. Modules in this "PrimMgmt" family typically expose system identification, port/VLAN configuration, and device-level operational status alongside basic control functions. Although no specific sample objects were captured for this module, equivalent D-Link switch MIBs of this type are used to check device uptime, firmware/software version, and general system health as part of routine switch monitoring. It complements standard IETF MIBs like IF-MIB and BRIDGE-MIB, which handle interface and VLAN/spanning-tree statistics that this vendor-specific module does not duplicate. It is typically deployed in enterprise and SMB network infrastructure where DGS-3120 switches serve as managed gigabit access/aggregation switches.
IPNetwork Monitor allows you to monitor SNMP objects defined in SWDGS3120PRIMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DGS-3120 series gigabit Ethernet switches
Monitoring Examples
No sample object names were extracted for SWDGS3120PRIMGMT-MIB, so specific tables or scalar OIDs cannot be cited without inventing them. Based on the short description and D-Link's naming conventions for this MIB family, it would be used to check DGS-3120 system configuration and operational status, but the concrete object identifiers for a realistic polling scenario are not present in the provided data.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink_Dgs3120Prod | 1.3.6.1.4.1.171.10.117 | |||
| dlink_Dgs3120ProdModel | 1.3.6.1.4.1.171.10.117.1 | |||
| dlink_Dgs3120Prod_Dgs3120_24TC | 1.3.6.1.4.1.171.10.117.1.1 | |||
| dlink_Dgs3120Prod_Dgs3120_24PC | 1.3.6.1.4.1.171.10.117.1.2 | |||
| dlink_Dgs3120Prod_Dgs3120_24SC | 1.3.6.1.4.1.171.10.117.1.3 | |||
| dlink_Dgs3120Prod_Dgs3120_48TC | 1.3.6.1.4.1.171.10.117.1.4 | |||
| dlink_Dgs3120Prod_Dgs3120_48PC | 1.3.6.1.4.1.171.10.117.1.5 | |||
| dlink_Dgs3120Prod_Dgs3120_24SC_DC | 1.3.6.1.4.1.171.10.117.1.6 | |||
| dlink_Dgs3120Proj | 1.3.6.1.4.1.171.11.117 | |||
| dlink_Dgs3120ProjModel | 1.3.6.1.4.1.171.11.117.1 | |||
| dlink_Dgs3120Proj_Dgs3120_24TC | 1.3.6.1.4.1.171.11.117.1.1 | |||
| dlink_Dgs3120Proj_Dgs3120_24PC | 1.3.6.1.4.1.171.11.117.1.2 | |||
| dlink_Dgs3120Proj_Dgs3120_24SC | 1.3.6.1.4.1.171.11.117.1.3 | |||
| dlink_Dgs3120Proj_Dgs3120_48TC | 1.3.6.1.4.1.171.11.117.1.4 | |||
| dlink_Dgs3120Proj_Dgs3120_48PC | 1.3.6.1.4.1.171.11.117.1.5 | |||
| dlink_Dgs3120Proj_Dgs3120_24SC_DC | 1.3.6.1.4.1.171.11.117.1.6 |
RFC description
Vendor-private MIB for Sycamore WDM/DWDM switch management, covering optical signal parameters and performance.
Start monitoring D-Link DGS-3120 series gigabit Ethernet switch (primary management config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.