DES3200-26-L3MGMT-MIB

All MIBs › DES3200-26-L3MGMT-MIB

Organization: D-Link, Inc.

Last Updated: 2009-11-07

Category: Routing Protocols, Vendor: D-Link

Description: Manages L3 IP routing and interface configuration for D-Link DES-3200-26 switch.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DES3200-26-L3MGMT-MIB?

DES3200-26-L3MGMT-MIB is D-Link's enterprise MIB for Layer 3 IP routing and interface configuration management on the DES-3200-26 switch, extending its base L2 switching MIB. Its general categories are IP interface configuration and routing setup data supporting inter-VLAN and static routing on an access-layer switch. Being a configuration-oriented management MIB, its monitoring role is primarily software/configuration status — verifying IP interfaces and routing entries are correctly provisioned, which would reveal a misconfigured or non-functional L3 interface, though no concrete object names are available here to detail specific status counters. It parallels standard IP-MIB routing concepts within D-Link's enterprise MIB structure rather than replacing them. Typical deployment is a DES-3200-26 switch used for combined L2 switching and lightweight L3 routing in a branch or campus access layer, and administrators configuring this switch typically start with a DES3200-26-L3MGMT-MIB download to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DES3200-26-L3MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DES-3200-26 switch (L3 routing feature)

Monitoring Examples

No sample objects were provided for this MIB, so specific table/object names cannot be cited; per its stated purpose, an admin would be expected to poll IP interface and route configuration objects to confirm inter-VLAN routing is functioning, but the exact object names are not available to ground this.

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From SWPRIMGMT-DES3200-MIB

des3200-26

OIDs

OID symbolic	OID numeric	Type	Access	Description
swL3MgmtMIB	1.3.6.1.4.1.171.11.113.4.3			The Structure of Layer 3 Network Management Information for enterprise.
swL3DevMgmt	1.3.6.1.4.1.171.11.113.4.3.1
swL3IpMgmt	1.3.6.1.4.1.171.11.113.4.3.2
swL3IpCtrlMgmt	1.3.6.1.4.1.171.11.113.4.3.2.1
swL3IpCtrlTable	1.3.6.1.4.1.171.11.113.4.3.2.1.3		not-accessible	This table contains IP interface information.
swL3IpCtrlEntry	1.3.6.1.4.1.171.11.113.4.3.2.1.3.1		not-accessible	A list of information about a specific IP interface.
STR swL3IpCtrlInterfaceName	1.3.6.1.4.1.171.11.113.4.3.2.1.3.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
ADR swL3IpCtrlIpv6LinkLocalAddress	1.3.6.1.4.1.171.11.113.4.3.2.1.3.1.14	Ipv6Address	read-only	The IPv6 link local address for this interface.
INT swL3IpCtrlIpv6LinkLocalPrefixLen	1.3.6.1.4.1.171.11.113.4.3.2.1.3.1.15	INTEGER	read-only	The IPv6 prefix length for this IPv6 link local address.
INT swL3IpCtrlIpv6LinkLocalAutoState	1.3.6.1.4.1.171.11.113.4.3.2.1.3.1.17	INTEGER	read-write	The state of the IPv6 link local auto.
INT swL3IpCtrlIpDhcpOption12State	1.3.6.1.4.1.171.11.113.4.3.2.1.3.1.22	INTEGER	read-write	Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message.
STR swL3IpCtrlIpDhcpOption12HostName	1.3.6.1.4.1.171.11.113.4.3.2.1.3.1.23	DisplayString	read-write	Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12.
swL3Ipv6CtrlTable	1.3.6.1.4.1.171.11.113.4.3.2.1.4		not-accessible	This table contains IPv6 information of an IP interface.
swL3Ipv6CtrlEntry	1.3.6.1.4.1.171.11.113.4.3.2.1.4.1		not-accessible	A list of IPv6 information about a specific IP interface.
STR swL3Ipv6CtrlInterfaceName	1.3.6.1.4.1.171.11.113.4.3.2.1.4.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
INT swL3Ipv6CtrlMaxReassmblySize	1.3.6.1.4.1.171.11.113.4.3.2.1.4.1.2	INTEGER	read-only	Maximum Reassembly Size of the IP interface.
U32 swL3Ipv6CtrlNsRetransTimer	1.3.6.1.4.1.171.11.113.4.3.2.1.4.1.3	Unsigned32	read-write	Neighbor solicitation's retransmit timer. The unit is set in milliseconds.
swL3Ipv6AddressCtrlTable	1.3.6.1.4.1.171.11.113.4.3.2.1.5		not-accessible	This table contains IPv6 address information for each IP interface.
swL3Ipv6AddressCtrlEntry	1.3.6.1.4.1.171.11.113.4.3.2.1.5.1		not-accessible	A list of information about a specific IPv6 address.
STR swL3Ipv6AddressCtrlInterfaceName	1.3.6.1.4.1.171.11.113.4.3.2.1.5.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
ADR swL3Ipv6Address	1.3.6.1.4.1.171.11.113.4.3.2.1.5.1.2	Ipv6Address	read-only	Specify the IPv6 address.
INT swL3Ipv6AddressCtrlPrefixLen	1.3.6.1.4.1.171.11.113.4.3.2.1.5.1.3	INTEGER	read-only	Indicates the prefix length of this IPv6 address.
ROW swL3Ipv6AddressCtrlState	1.3.6.1.4.1.171.11.113.4.3.2.1.5.1.8	RowStatus	read-create	This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
INT swL3IpCtrlAllIpIfState	1.3.6.1.4.1.171.11.113.4.3.2.1.7	INTEGER	read-write	This object indicates all interface function state of the device.

RFC description

Layer 3 management MIB for D-Link DES3200-26 switch series; vendor-private IP routing and interface configuration.

Start monitoring D-Link DES-3200-26 switch (L3 routing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DES3200-26-L3MGMT-MIB

What Is DES3200-26-L3MGMT-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description