DELL-STORAGE-SC-MIB

All MIBs › DELL-STORAGE-SC-MIB

Organization: Dell-Compellent

Last Updated: 2014-01-29

Category: Fibre Channel and Storage, Vendor: Dell

Description: Manages Dell Storage Compellent (SC series) SAN array configuration and performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DELL-STORAGE-SC-MIB?

DELL-STORAGE-SC-MIB is Dell's enterprise MIB for monitoring Dell Storage Center (formerly Compellent) SAN arrays, covering the array's overall health and storage-specific status rather than network interfaces. Its general categories are hardware component status (controllers, disks, power/cooling), storage capacity/volume configuration, and fault conditions on the array. It is explicitly a hardware-status monitoring MIB for storage — administrators use it to check disk/drive health, controller status, and power supply/fan health on the SAN enclosure, alongside overall array operational state, to catch a failing disk or degraded storage pool before data loss. As a Dell enterprise MIB it is self-contained but conceptually parallels standard storage/host-resources status concepts adapted to Compellent's architecture. Typical deployment is a Dell Compellent/SC series SAN array monitored by a storage or infrastructure team for capacity and hardware fault status. Engineers can download the DELL-STORAGE-SC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DELL-STORAGE-SC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell Storage Center / Compellent SC-series SAN array

Monitoring Examples

No sample objects were provided for this MIB, so specific table/object names cannot be cited; per its stated purpose, an admin would be expected to poll controller, disk, and enclosure status objects to detect a failed drive or degraded storage pool, but the exact object names are not available to ground this.

Imported Objects

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-MIB

sysName

OBJECT-TYPE

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using productIDGlobalStatus OID:

Select a Dell Storage Center/Compellent SC-series SAN array as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type productIDGlobalStatus into the Find box to locate it in the OID tree, then select it and click OK. It reports the current status of the product. This is a rollup for the entire product including any monitored devices. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'ok', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
dellEnterprise	1.3.6.1.4.1.674			SNMP Enterprise number for Dell.
dellEnterpriseBranch	1.3.6.1.4.1.674.11000			Prefix for Dell Enterprise Branch.
dellStorageSubBranch	1.3.6.1.4.1.674.11000.2000			Prefix for Dell Storage Sub-Branch.
compellentEnterprise	1.3.6.1.4.1.674.11000.2000.500			Prefix for Dell-Compellent enterprise.
storageCenter	1.3.6.1.4.1.674.11000.2000.500.1			Prefix for Storage Center product line.
storageCenterModule	1.3.6.1.4.1.674.11000.2000.500.1.1			The MIB is for monitoring the status of Storage Center products from Dell Storage.
storageCenterObjects	1.3.6.1.4.1.674.11000.2000.500.1.2			Storage Center Objects.
STR productIDDisplayName	1.3.6.1.4.1.674.11000.2000.500.1.2.1	SnmpAdminString	read-only	Name of this product for display purposes.
STR productIDDescription	1.3.6.1.4.1.674.11000.2000.500.1.2.2	SnmpAdminString	read-only	A short description of this product.
STR productIDVendor	1.3.6.1.4.1.674.11000.2000.500.1.2.3	SnmpAdminString	read-only	The name of the product manufacturer.
STR productIDVersion	1.3.6.1.4.1.674.11000.2000.500.1.2.4	SnmpAdminString	read-only	The version of this product.
STR productIDSerialNumber	1.3.6.1.4.1.674.11000.2000.500.1.2.5	SnmpAdminString	read-only	The Dell Service Tag.
INT productIDGlobalStatusEx	1.3.6.1.4.1.674.11000.2000.500.1.2.6	INTEGER	read-only	Current status of the product. This is a rollup for the entire product including any monitored devices. The status is intended to give initiative to an SNMP monitor to get further data when this status is abnormal. The value here maps from the System Status icon on the SC GUI: grey->unknown, green->ok, yellow->noncritical, red->critical. If the productIDGlobalStatus is not ok then scLastWorstAlert contains the scAlertNbr of the alert that is responsible for the negative status.
STR productIDBuildNumber	1.3.6.1.4.1.674.11000.2000.500.1.2.7	SnmpAdminString	read-only	The software build number of the product populating the MIB.
STR productIDURL	1.3.6.1.4.1.674.11000.2000.500.1.2.8	SnmpAdminString	read-only	The URL of the web-based application to manage this device.
STR scAlertDef	1.3.6.1.4.1.674.11000.2000.500.1.2.9	SnmpAdminString	read-only	Alert Definition unique identifier
U32 scIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.10	Unsigned32	read-only	Storage Center Index, typically the SC HSN (Hardware Serial Number. Not a true hardware s/n, but a logical s/n on which to assign liensed-features).
STR scTestString	1.3.6.1.4.1.674.11000.2000.500.1.2.11	SnmpAdminString	read-only	Test String used by scTestTrap: 'SNMP server subsystem is accessible'
STR scMiscAlertString	1.3.6.1.4.1.674.11000.2000.500.1.2.12	SnmpAdminString	read-only	String used by last scMiscAlert
scCtlrTable	1.3.6.1.4.1.674.11000.2000.500.1.2.13		not-accessible	Controller Table
scCtlrEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1		not-accessible	an entry in scCtlrTable
U32 scCtlrIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.1	Unsigned32	not-accessible	index into scCtlrTable (same value as scCtlrNbr)
U32 scCtlrNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.2	Unsigned32	read-only	controller number (same value as scCtlrIndex)
SCS scCtlrStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.3	ScStatus	read-only	controller status
STR scCtlrName	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.4	SnmpAdminString	read-only	controller name
STR scCtlrIpAddr	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.5	SnmpAdminString	read-only	controller IP Address
STR scCtlrForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.6	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scCtlrStatusChange trap. GET always returns the string 'Empty'.
STR scCtlrModel	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.7	SnmpAdminString	read-only	controller Model
STR scCtlrServiceTag	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.8	SnmpAdminString	read-only	controller Dell Service Tag
STR scCtlrAssetTag	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.9	SnmpAdminString	read-only	controller Asset Tag
STR scCtlrIPv6Eth0IP	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.10	SnmpAdminString	read-only	controller IPv6 Eth0 IP Address
U32 scCtlrIPv6Eth0IPPrefix	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.11	Unsigned32	read-only	controller IPv6 Eth0 IP Addr Prefix Length
T/F scCtlrLeader	1.3.6.1.4.1.674.11000.2000.500.1.2.13.1.12	TruthValue	read-only	bool that tells if this controller is the lead
scDiskTable	1.3.6.1.4.1.674.11000.2000.500.1.2.14		not-accessible	Disk Table
scDiskEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1		not-accessible	an entry in scDiskTable
U32 scDiskIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.1	Unsigned32	not-accessible	index into scDiskTable (same value as scDiskNbr)
U32 scDiskNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.2	Unsigned32	read-only	disk number (same value as scDiskIndex)
SCS scDiskStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.3	ScStatus	read-only	disk status
STR scDiskNamePosition	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.4	SnmpAdminString	read-only	disk name: format ee-dd where ee is the enclosure number, and dd is the disk number.
T/F scDiskHealthy	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.5	TruthValue	read-only	true(1) indicates that the disk is healthy
STR scDiskStatusMsg	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.6	SnmpAdminString	read-only	disk status message: set to 'no status message' when scDiskStatus=up
U32 scDiskApiIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.7	Unsigned32	read-only	disk api index: used internal to the SC
STR scDiskForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.8	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scDiskStatusChange trap. GET always returns the string 'Empty'.
U32 scDiskSize	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.9	Unsigned32	read-only	disk size: raw capacity in GB
INT scDiskIoPortType	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.10	INTEGER	read-only	disk I/O port type (bus type)
U32 scDiskEnclosure	1.3.6.1.4.1.674.11000.2000.500.1.2.14.1.11	Unsigned32	read-only	disk enclosure index
scEnclTable	1.3.6.1.4.1.674.11000.2000.500.1.2.15		not-accessible	Enclosure Table
scEnclEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1		not-accessible	an entry in scEnclTable
U32 scEnclIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.1	Unsigned32	not-accessible	index into scEnclTable (same value as scEnclNbr)
U32 scEnclNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.2	Unsigned32	read-only	enclosure number (same value as scEnclIndex)
SCS scEnclStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.3	ScStatus	read-only	enclosure status
STR scEnclName	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.4	SnmpAdminString	read-only	enclosure name
STR scEnclStatusDescr	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.5	SnmpAdminString	read-only	enclosure status description
STR scEnclType	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.6	SnmpAdminString	read-only	enclosure type
STR scEnclModel	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.7	SnmpAdminString	read-only	enclosure model
STR scEnclForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.8	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scEnclStatusChange trap. GET always returns the string 'Empty'.
STR scEnclServiceTag	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.9	SnmpAdminString	read-only	enclosure Dell Service Tag
STR scEnclAssetTag	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.10	SnmpAdminString	read-only	enclosure Asset Tag
U32 scEnclApiIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.15.1.11	Unsigned32	read-only	enclosure api index: used internal to the SC
scCtlrFanTable	1.3.6.1.4.1.674.11000.2000.500.1.2.16		not-accessible	Controller Fan Sensor Table
scCtlrFanEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1		not-accessible	an entry in scCtlrFanTable
U32 scCtlrFanIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.1	Unsigned32	not-accessible	index into scCtlrFanTable (same value as scCtlrFanNbr)
U32 scCtlrFanNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.2	Unsigned32	read-only	Fan number (same value as scCtlrFanIndex)
SCS scCtlrFanStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.3	ScStatus	read-only	Fan status
STR scCtlrFanName	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.4	SnmpAdminString	read-only	Fan name
U32 scCtlrFanCurrentRpm	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.5	Unsigned32	read-only	Fan current rpm
U32 scCtlrFanNormMaxRpm	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.6	Unsigned32	read-only	Fan normal maximum rpm
U32 scCtlrFanNormMinRpm	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.7	Unsigned32	read-only	Fan normal minimum rpm
U32 scCtlrFanWarnLwrRpm	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.8	Unsigned32	read-only	Fan warning lower threshold rpm
U32 scCtlrFanWarnUprRpm	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.9	Unsigned32	read-only	Fan warning-level upper threshold rpm
U32 scCtlrFanCritLwrRpm	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.10	Unsigned32	read-only	Fan crtical-level lower threshold rpm
U32 scCtlrFanCritUprRpm	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.11	Unsigned32	read-only	Fan crtical-level upper threshold rpm
STR scCtlrFanForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.12	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scCtlrCompStatusChange trap. GET always returns the string 'Empty'.
U32 scCtlrFanApiIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.16.1.13	Unsigned32	read-only	fan api index: used internal to the SC
scCtlrPowerTable	1.3.6.1.4.1.674.11000.2000.500.1.2.17		not-accessible	Controller Power Supply Table
scCtlrPowerEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.17.1		not-accessible	an entry in scCtlrPowerTable
U32 scCtlrPowerIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.17.1.1	Unsigned32	not-accessible	index into scCtlrPowerTable (same value as scCtlrPowerNbr)
U32 scCtlrPowerNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.17.1.2	Unsigned32	read-only	Ctlr Power Supply number (same value as scCtlrPowerIndex)
SCS scCtlrPowerStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.17.1.3	ScStatus	read-only	Controller Power Supply status
STR scCtlrPowerName	1.3.6.1.4.1.674.11000.2000.500.1.2.17.1.4	SnmpAdminString	read-only	Controller Power Supply name
STR scCtlrPowerForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.17.1.5	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scCtlrCompStatusChange trap. GET always returns the string 'Empty'.
scCtlrVoltageTable	1.3.6.1.4.1.674.11000.2000.500.1.2.18		not-accessible	Voltage Sensor Table
scCtlrVoltageEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1		not-accessible	an entry in scCtlrVoltageTable
U32 scCtlrVoltageIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.1	Unsigned32	not-accessible	index into scCtlrVoltageTable (same value as scCtlrVoltageNbr)
U32 scCtlrVoltageNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.2	Unsigned32	read-only	Ctlr Voltage Sensor number (same value as scCtlrVoltageIndex)
SCS scCtlrVoltageStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.3	ScStatus	read-only	Controller Voltage Sensor status
STR scCtlrVoltageName	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.4	SnmpAdminString	read-only	Controller Voltage Sensor name
STR scCtlrVoltageCurrentV	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.5	SnmpAdminString	read-only	Controller Voltage Current Voltage
STR scCtlrVoltageNormMaxV	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.6	SnmpAdminString	read-only	Controller Voltage Normal Maximum
STR scCtlrVoltageNormMinV	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.7	SnmpAdminString	read-only	Controller Voltage Normal Minimum
STR scCtlrVoltageWarnLwrV	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.8	SnmpAdminString	read-only	Controller Voltage Warning-level Lower Threshold
STR scCtlrVoltageWarnUprV	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.9	SnmpAdminString	read-only	Controller Voltage Warning-level Upper Threshold
STR scCtlrVoltageCritLwrV	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.10	SnmpAdminString	read-only	Controller Voltage Critical-level Lower Threshold
STR scCtlrVoltageCritUprV	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.11	SnmpAdminString	read-only	Controller Voltage Critical-level Upper Threshold
STR scCtlrVoltageForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.18.1.12	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scCtlrCompStatusChange trap. GET always returns the string 'Empty'.
scCtlrTempTable	1.3.6.1.4.1.674.11000.2000.500.1.2.19		not-accessible	Temperature Sensor Table
scCtlrTempEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1		not-accessible	an entry in scCtlrTempTable
U32 scCtlrTempIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.1	Unsigned32	not-accessible	index into scCtlrTempTable (same value as scCtlrTempNbr)
U32 scCtlrTempNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.2	Unsigned32	read-only	Ctlr Temp Sensor number (same value as scCtlrTempIndex)
SCS scCtlrTempStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.3	ScStatus	read-only	Controller Temp Sensor status
STR scCtlrTempName	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.4	SnmpAdminString	read-only	Controller Temp Sensor name
U32 scCtlrTempCurrentC	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.5	Unsigned32	read-only	Controller Temp Sensor Current Temperature in Celcius
U32 scCtlrTempNormMaxC	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.6	Unsigned32	read-only	Controller Temp Sensor Normal Maximum Temp in Celcius
U32 scCtlrTempNormMinC	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.7	Unsigned32	read-only	Controller Temp Sensor Normal Minimum Temp in Celcius
U32 scCtlrTempWarnLwrC	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.8	Unsigned32	read-only	Controller Temp Sensor Warning-level Lower Threshold
U32 scCtlrTempWarnUprC	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.9	Unsigned32	read-only	Controller Temp Sensor Warning-level Upper Threshold
U32 scCtlrTempCritLwrC	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.10	Unsigned32	read-only	Controller Temp Sensor Critical-level Lower Threshold
U32 scCtlrTempCritUprC	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.11	Unsigned32	read-only	Controller Temp Sensor Critical-level Upper Threshold
STR scCtlrTempForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.19.1.12	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scCtlrCompStatusChange trap. GET always returns the string 'Empty'.
scEnclFanTable	1.3.6.1.4.1.674.11000.2000.500.1.2.20		not-accessible	enclosure Fan Sensor Table
scEnclFanEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.20.1		not-accessible	an entry in scEnclFanTable
U32 scEnclFanIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.20.1.1	Unsigned32	not-accessible	index into scEnclFanTable (same value as scEnclFanNbr)
U32 scEnclFanNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.20.1.2	Unsigned32	read-only	Fan number (same value as scEnclFanIndex)
SCS scEnclFanStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.20.1.3	ScStatus	read-only	Fan status
STR scEnclFanLocation	1.3.6.1.4.1.674.11000.2000.500.1.2.20.1.4	SnmpAdminString	read-only	Fan location
STR scEnclFanCurrentS	1.3.6.1.4.1.674.11000.2000.500.1.2.20.1.5	SnmpAdminString	read-only	Fan current speed: high, Low, Medium, Off, Unknown
STR scEnclFanForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.20.1.6	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scEnclCompStatusChange trap. GET always returns the string 'Empty'.
scEnclPowerTable	1.3.6.1.4.1.674.11000.2000.500.1.2.21		not-accessible	enclosure Power Supply Table
scEnclPowerEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.21.1		not-accessible	an entry in scEnclPowerTable
U32 scEnclPowerIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.21.1.1	Unsigned32	not-accessible	index into scEnclPowerTable (same value as scEnclPowerNbr)
U32 scEnclPowerNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.21.1.2	Unsigned32	read-only	Encl Power Supply number (same value as scEnclPowerIndex)
SCS scEnclPowerStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.21.1.3	ScStatus	read-only	enclosure Power Supply status
STR scEnclPowerPosition	1.3.6.1.4.1.674.11000.2000.500.1.2.21.1.4	SnmpAdminString	read-only	enclosure Power Supply position
STR scEnclPowerForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.21.1.5	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scEnclCompStatusChange trap. GET always returns the string 'Empty'.
scEnclIoModTable	1.3.6.1.4.1.674.11000.2000.500.1.2.22		not-accessible	I/O Module Table
scEnclIoModEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.22.1		not-accessible	an entry in scEnclIoModTable
U32 scEnclIoModIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.22.1.1	Unsigned32	not-accessible	index into scEnclIoModTable (same value as scEnclIoModNbr)
U32 scEnclIoModNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.22.1.2	Unsigned32	read-only	Encl I/O Module number (same value as scEnclIoModIndex)
SCS scEnclIoModStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.22.1.3	ScStatus	read-only	enclosure I/O Module status
STR scEnclIoModPosition	1.3.6.1.4.1.674.11000.2000.500.1.2.22.1.4	SnmpAdminString	read-only	enclosure I/O Module position
STR scEnclIoModForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.22.1.5	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scEnclCompStatusChange trap. GET always returns the string 'Empty'.
scEnclTempTable	1.3.6.1.4.1.674.11000.2000.500.1.2.23		not-accessible	Temperature Sensor Table
scEnclTempEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.23.1		not-accessible	an entry in scEnclTempTable
U32 scEnclTempIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.23.1.1	Unsigned32	not-accessible	index into scEnclTempTable (same value as scEnclTempNbr)
U32 scEnclTempNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.23.1.2	Unsigned32	read-only	Encl Temp Sensor number (same value as scEnclTempIndex)
SCS scEnclTempStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.23.1.3	ScStatus	read-only	enclosure Temp Sensor status
STR scEnclTempLocation	1.3.6.1.4.1.674.11000.2000.500.1.2.23.1.4	SnmpAdminString	read-only	enclosure Temp Sensor location
U32 scEnclTempCurrentC	1.3.6.1.4.1.674.11000.2000.500.1.2.23.1.5	Unsigned32	read-only	enclosure Temp Sensor current temperature in Celcius
STR scEnclTempForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.23.1.6	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scEnclCompStatusChange trap. GET always returns the string 'Empty'.
scEnclAlarmTable	1.3.6.1.4.1.674.11000.2000.500.1.2.24		not-accessible	Audible Alarm Table
scEnclAlarmEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.24.1		not-accessible	an entry in scEnclAlarmTable
U32 scEnclAlarmIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.24.1.1	Unsigned32	not-accessible	index into scEnclAlarmTable (same value as scEnclAlarmNbr)
U32 scEnclAlarmNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.24.1.2	Unsigned32	read-only	Encl Audible Alarm number (same value as scEnclTempIndex)
SCS scEnclAlarmStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.24.1.3	ScStatus	read-only	enclosure Audible Alarm status
STR scEnclAlarmName	1.3.6.1.4.1.674.11000.2000.500.1.2.24.1.4	SnmpAdminString	read-only	enclosure Audible Alarm name
STR scEnclAlarmForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.24.1.5	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scEnclCompStatusChange trap. GET always returns the string 'Empty'.
scDiskFolderTable	1.3.6.1.4.1.674.11000.2000.500.1.2.25		not-accessible	Disk Folder Table
scDiskFolderEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1		not-accessible	an entry in scDiskFolderTable
U32 scDiskFolderIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1.1	Unsigned32	not-accessible	index into scDiskFolderTable (same value as scDiskFolderNbr)
U32 scDiskFolderNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1.2	Unsigned32	read-only	disk folder number (same value as scDiskFolderIndex)
SCS scDiskFolderStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1.3	ScStatus	read-only	Disk Folder status
STR scDiskFolderName	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1.4	SnmpAdminString	read-only	Disk Folder name
U32 scDiskFolderCapcty	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1.5	Unsigned32	read-only	deprecated: Disk Folder capacity calcualted as totalSpace - usedSpace
U32 scDiskFolderAlrtThr	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1.6	Unsigned32	read-only	Disk Folder alert threshold
U32 scDiskFolderApiIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1.7	Unsigned32	read-only	Disk Folder api index: used internal to the SC
STR scDiskFolderForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1.8	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scDiskFolderStatusChange trap. GET always returns the string 'Empty'.
U32 scDiskFolderCapcty2	1.3.6.1.4.1.674.11000.2000.500.1.2.25.1.9	Unsigned32	read-only	Disk Folder capacity is same as scDiskFolderSUFreeSpace
scVolumeTable	1.3.6.1.4.1.674.11000.2000.500.1.2.26		not-accessible	Volume Table
scVolumeEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.26.1		not-accessible	an entry in scVolumeTable
U32 scVolumeIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.26.1.1	Unsigned32	not-accessible	index into scVolumeTable (same value as scVolumeNbr)
U32 scVolumeNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.26.1.2	Unsigned32	read-only	Volume number (same value as scVolumeIndex)
SCS scVolumeStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.26.1.3	ScStatus	read-only	Volume status
STR scVolumeName	1.3.6.1.4.1.674.11000.2000.500.1.2.26.1.4	SnmpAdminString	read-only	Volume name
U32 scVolumeApiIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.26.1.5	Unsigned32	read-only	Volume api index: used internal to the SC
STR scVolumeForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.26.1.6	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scVolumeStatusChange trap. GET always returns the string 'Empty'.
scServerTable	1.3.6.1.4.1.674.11000.2000.500.1.2.27		not-accessible	Server Table
scServerEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.27.1		not-accessible	an entry in scServerTable
U32 scServerIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.27.1.1	Unsigned32	not-accessible	index into scServerTable (same value as scServerNbr)
U32 scServerNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.27.1.2	Unsigned32	read-only	Managed Server number (same value as scServerIndex)
SCS scServerStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.27.1.3	ScStatus	read-only	Managed Server status
STR scServerName	1.3.6.1.4.1.674.11000.2000.500.1.2.27.1.4	SnmpAdminString	read-only	Managed Server name
INT scServerCnctvy	1.3.6.1.4.1.674.11000.2000.500.1.2.27.1.5	INTEGER	read-only	Managed Server connectivity
U32 scServerPathCount	1.3.6.1.4.1.674.11000.2000.500.1.2.27.1.6	Unsigned32	read-only	Managed Server path count: the number of primary paths from the server to the SC
U32 scServerApiIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.27.1.7	Unsigned32	read-only	Server api index: used internal to the SC
STR scServerForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.27.1.8	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scServerStatusChange trap. GET always returns the string 'Empty'.
scCacheTable	1.3.6.1.4.1.674.11000.2000.500.1.2.28		not-accessible	Ctlr Cache Table
scCacheEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.28.1		not-accessible	an entry in scCacheTable
U32 scCacheIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.28.1.1	Unsigned32	not-accessible	index into scCacheTable (same value as scCacheNbr)
U32 scCacheNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.28.1.2	Unsigned32	read-only	Ctlr Cache number (same value as scCacheIndex)
SCS scCacheStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.28.1.3	ScStatus	read-only	Ctlr Cache status
STR scCacheName	1.3.6.1.4.1.674.11000.2000.500.1.2.28.1.4	SnmpAdminString	read-only	Ctlr Cache name
INT scCacheBatStat	1.3.6.1.4.1.674.11000.2000.500.1.2.28.1.5	INTEGER	read-only	Ctlr Cache Battery Status
DAT scCacheBatExpr	1.3.6.1.4.1.674.11000.2000.500.1.2.28.1.6	DateAndTime	read-only	Ctlr Cache Battery Expiration Date
STR scCacheForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.28.1.7	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scCacheStatusChange trap. GET always returns the string 'Empty'.
scScTable	1.3.6.1.4.1.674.11000.2000.500.1.2.29		not-accessible	Storage Center Table
scScEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1		not-accessible	an entry in scScTable
U32 scScIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.1	Unsigned32	not-accessible	index into scScTable (same value as scScNbr)
U32 scScNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.2	Unsigned32	read-only	Storage Center number (same value as scScIndex)
SCS scScStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.3	ScStatus	read-only	Storage Center status
STR scScName	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.4	SnmpAdminString	read-only	Storage Center name. Can be changed via sysName.
STR scScContact	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.5	SnmpAdminString	read-only	Storage Center contact. Can be changed via sysContact.
STR scScLocation	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.6	SnmpAdminString	read-only	Storage Center location. Can be changed via sysLocation.
T/F scScPortsBal	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.7	TruthValue	read-only	Storage Center ports balanced
STR scScMgmtIP	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.8	SnmpAdminString	read-only	Storage Center management IP addr
U32 scScSerial	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.9	Unsigned32	read-only	Storage Center serial number
STR scScForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.10	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scLocalPortsStatusChange trap. GET always returns the string 'Empty'.
STR scScIPv6MgmtIP	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.11	SnmpAdminString	read-only	Storage Center IPv6 mgmt IP address
U32 scScIPv6MgmtIPPrefix	1.3.6.1.4.1.674.11000.2000.500.1.2.29.1.12	Unsigned32	read-only	Storage Center IPv6 mgmt IP addr prefix length
scUPSTable	1.3.6.1.4.1.674.11000.2000.500.1.2.30		not-accessible	Monitored UPS Table
scUPSEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.30.1		not-accessible	an entry in scUPSTable
U32 scUPSIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.30.1.1	Unsigned32	not-accessible	index into scUPSTable (same value as scUPSNbr)
U32 scUPSNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.30.1.2	Unsigned32	read-only	Monitored UPS number (same value as scUPSIndex)
SCS scUPSStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.30.1.3	ScStatus	read-only	Monitored UPS status
STR scUPSName	1.3.6.1.4.1.674.11000.2000.500.1.2.30.1.4	SnmpAdminString	read-only	Monitored UPS name
STR scUPSBatLife	1.3.6.1.4.1.674.11000.2000.500.1.2.30.1.5	SnmpAdminString	read-only	Monitored UPS battery life
STR scUPSStatusDescr	1.3.6.1.4.1.674.11000.2000.500.1.2.30.1.6	SnmpAdminString	read-only	Monitored UPS status description
U32 scUPSApiIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.30.1.7	Unsigned32	read-only	UPS api index: used internal to the SC
STR scUPSForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.30.1.8	SnmpAdminString	read-write	SET to 'ForceTrap' forces a scMonitoredUPSStatusChange trap. GET always returns the string 'Empty'.
scObjCntTable	1.3.6.1.4.1.674.11000.2000.500.1.2.31		not-accessible	Object Count Table
scObjCntEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.31.1		not-accessible	an entry in scObjCntTable
U32 scObjCntIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.31.1.1	Unsigned32	not-accessible	index into scObjCntTable (same value as scObjCntNbr)
U32 scObjCntNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.31.1.2	Unsigned32	read-only	Object Count number (same value as scObjCntIndex)
U32 scObjCntDevsInUse	1.3.6.1.4.1.674.11000.2000.500.1.2.31.1.3	Unsigned32	read-only	Number of Devices In Use
U32 scObjCntReplays	1.3.6.1.4.1.674.11000.2000.500.1.2.31.1.4	Unsigned32	read-only	Numbers of Replays
U32 scObjCntDisks	1.3.6.1.4.1.674.11000.2000.500.1.2.31.1.5	Unsigned32	read-only	Numbers of Disks
U32 scObjCntServers	1.3.6.1.4.1.674.11000.2000.500.1.2.31.1.6	Unsigned32	read-only	Numbers of Servers
U32 scObjCntVolumes	1.3.6.1.4.1.674.11000.2000.500.1.2.31.1.7	Unsigned32	read-only	Numbers of Volumes
scDiskFolderSUTable	1.3.6.1.4.1.674.11000.2000.500.1.2.32		not-accessible	Disk Folder Storage Usage Table
scDiskFolderSUEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1		not-accessible	an entry in scDiskFolderSUTable
U32 scDiskFolderSUIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.1	Unsigned32	not-accessible	index into scDiskFolderSUTable (same value as scDiskFolderSUNbr)
U32 scDiskFolderSUNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.2	Unsigned32	read-only	disk folder storage usage number (same value as scDiskFolderSUIndex)
U32 scDiskFolderSUTotalSpace	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.3	Unsigned32	read-only	Disk Folder Storage Usage total space, in GB (1,000,000,000). Replaced by scDiskFolderSUTotalSpace2.
U32 scDiskFolderSUUsedSpace	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.4	Unsigned32	read-only	Disk Folder Storage Usage used space, in GB (1,000,000,000). Replaced by scDiskFolderSUUsedSpace2
U32 scDiskFolderSUTotalSpace2	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.5	Unsigned32	read-only	Disk Folder Storage Usage total space, in GB (1,073,741,824). Matches 'Total disk space' on SC GUI.
U32 scDiskFolderSUUsedSpace2	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.6	Unsigned32	read-only	Disk Folder Storage Usage used space, in GB (1,073,741,824). Matches 'Allocated space used by volumes' on SC GUI.
U32 scDiskFolderSUAllocSpace	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.7	Unsigned32	read-only	Disk Folder Storage Usage allocated space, in GB (1,073,741,824). Matches 'Total space allocated for volume use' minus 'Unhealthy/Bad disk space' on SC GUI.
U32 scDiskFolderSUFreeSpace	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.8	Unsigned32	read-only	Disk Folder Storage Usage free space, in GB (1,073,741,824). scDiskFolderSUFreeSpace = scDiskFolderSUTotalSpace2 - scDiskFolderSUAllocSpace - scDiskFolderSUUsedSpace2. Matches 'Unallocated disk space' on SC GUI.
U32 scDiskFolderSUSpareSpace	1.3.6.1.4.1.674.11000.2000.500.1.2.32.1.9	Unsigned32	read-only	Disk Folder Storage Usage spare space, in GB (1,073,741,824). Matches 'spares available' on SC GUI.
INT scSIDeviceType	1.3.6.1.4.1.674.11000.2000.500.1.2.33	INTEGER	read-only	SCSI Initiator Device Type
SCS scSIDeviceStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.34	ScStatus	read-only	SCSI Initiator Device Status
SCS scHWCompStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.35	ScStatus	read-only	Last Hardware Component Status sent with scCtlrCompStatusChange and scEnclCompStatusChange.
STR scHWCompName	1.3.6.1.4.1.674.11000.2000.500.1.2.36	SnmpAdminString	read-only	Last Hardware Component Name sent with scCtlrCompStatusChange and scEnclCompStatusChange.
STR scHWCompPosition	1.3.6.1.4.1.674.11000.2000.500.1.2.37	SnmpAdminString	read-only	Last Hardware Component Position sent with scCtlrCompStatusChange and scEnclCompStatusChange.
SCH scHWCompType	1.3.6.1.4.1.674.11000.2000.500.1.2.38	ScHardwareType	read-only	Last Hardware Component Type sent with scCtlrCompStatusChange and scEnclCompStatusChange.
STR scHWCompState	1.3.6.1.4.1.674.11000.2000.500.1.2.39	SnmpAdminString	read-only	Last Hardware Component State sent with scCtlrCompStatusChange and scEnclCompStatusChange. Has meaning only in case of ScHardwareType = tempsensor, voltagesensor, or fan.
STR scTrapAction	1.3.6.1.4.1.674.11000.2000.500.1.2.40	SnmpAdminString	read-only	Recommend action associated with the most recent trap.
STR scAlertMsg	1.3.6.1.4.1.674.11000.2000.500.1.2.41	SnmpAdminString	read-only	Alert message associated with the most recent trap.
STR scForceTrap	1.3.6.1.4.1.674.11000.2000.500.1.2.42	SnmpAdminString	read-write	For software development use.
T/F scTrapNormalized	1.3.6.1.4.1.674.11000.2000.500.1.2.43	TruthValue	read-only	Trap-normalized boolean flag: true means that the associated alert condition is now normal, i.e., that alert has cleared.
U32 scLastWorstAlert	1.3.6.1.4.1.674.11000.2000.500.1.2.44	Unsigned32	read-only	If the productIDGlobalStatus is not ok then scLastWorstAlert contains the scAlertNbr of the alert that is responsible for the negative status.
scDiskConfigTable	1.3.6.1.4.1.674.11000.2000.500.1.2.45		not-accessible	Disk Configuration Table
scDiskConfigEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.45.1		not-accessible	an entry in scDiskConfigTable
U32 scDiskConfigIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.45.1.1	Unsigned32	not-accessible	index into scDiskConfigTable (same value as scDiskConfigNbr)
U32 scDiskConfigNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.45.1.2	Unsigned32	read-only	disk config number (same value as scDiskFolderIndex)
STR scDiskConfigSerial	1.3.6.1.4.1.674.11000.2000.500.1.2.45.1.3	SnmpAdminString	read-only	Disk Config serial number
STR scDiskConfigVendor	1.3.6.1.4.1.674.11000.2000.500.1.2.45.1.4	SnmpAdminString	read-only	Disk Config vendor name
STR scDiskConfigProduct	1.3.6.1.4.1.674.11000.2000.500.1.2.45.1.5	SnmpAdminString	read-only	Disk Config product description
STR scDiskConfigModel	1.3.6.1.4.1.674.11000.2000.500.1.2.45.1.6	SnmpAdminString	read-only	Disk vendor + product description
STR scDiskConfigRev	1.3.6.1.4.1.674.11000.2000.500.1.2.45.1.7	SnmpAdminString	read-only	Disk revision
U32 scDiskConfigApiIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.45.1.8	Unsigned32	read-only	Disk Config api index: used internal to the SC
scAlertTable	1.3.6.1.4.1.674.11000.2000.500.1.2.46		not-accessible	Alert Table
scAlertEntry	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1		not-accessible	an entry in scAlertTable
U32 scAlertIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.1	Unsigned32	not-accessible	index into scAlertTable (same value as scAlertNbr)
U32 scAlertNbr	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.2	Unsigned32	read-only	alert number (same value as scalertIndex)
INT scAlertStatus	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.3	INTEGER	read-only	Alert status
U32 scAlertApiIndex	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.4	Unsigned32	read-only	Alert api index: used internal to the SC
STR scAlertDefinition	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.5	SnmpAdminString	read-only	Alert definition
INT scAlertCategory	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.6	INTEGER	read-only	Alert status
STR scAlertCreateTime	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.7	SnmpAdminString	read-only	Alert creation time
STR scAlertMessage	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.8	SnmpAdminString	read-only	Alert message
INT scAlertType	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.9	INTEGER	read-only	Alert type
T/F scAlertAcknowledged	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.10	TruthValue	read-only	Alert-acknowledged boolean flag tells whether alert has been acknowledged via the SC GUI
T/F scAlertActive	1.3.6.1.4.1.674.11000.2000.500.1.2.46.1.11	TruthValue	read-only	Alert-active boolean flag tells whether alert is active. 'false' = alert has been cleared.
storageCenterConformance	1.3.6.1.4.1.674.11000.2000.500.1.3			Storage Center Conformance.
storageCenterCompliances	1.3.6.1.4.1.674.11000.2000.500.1.3.1			Storage Center Compliances.
storageCenterCompliance1	1.3.6.1.4.1.674.11000.2000.500.1.3.1.1			Deprectaed compliance statement.
storageCenterCompliance2	1.3.6.1.4.1.674.11000.2000.500.1.3.1.2			The compliance statement for Storage Center SNMP entities.
storageCenterGroups	1.3.6.1.4.1.674.11000.2000.500.1.3.2			Storage Center Groups.
storageCenterNotificationsGroup	1.3.6.1.4.1.674.11000.2000.500.1.3.2.1			Decrepated Traps. These traps, organized by 'severity', contain truncated alert-strings. These traps have been deprecated in favor of the traps in storageCenterNotificationsGroup2, organized by function.
storageCenterNotificationsGroup2	1.3.6.1.4.1.674.11000.2000.500.1.3.2.2			Traps organized by function. Deprecates storageCenterNotificationsGroup.
storageCenterObjectsGroup	1.3.6.1.4.1.674.11000.2000.500.1.3.2.3			The objects.
productID	1.3.6.1.4.1.674.11000.2000.500.1.3.2.4			The product identification objects.
storageCenterObjectsGroupDeprecated	1.3.6.1.4.1.674.11000.2000.500.1.3.2.5			The deprecated objects.
storageCenterTrapsNotif	1.3.6.1.4.1.674.11000.2000.500.1.251			Storage Center Traps Notif.
trapSevPrefix	1.3.6.1.4.1.674.11000.2000.500.1.251.0			trapSevPrefix.
NTF trapStatusOkay	1.3.6.1.4.1.674.11000.2000.500.1.251.0.1			Deprecated: Storage Center Trap in Okay state.
NTF trapStatusDegraded	1.3.6.1.4.1.674.11000.2000.500.1.251.0.2			Deprecated: Storage Center Trap in Degraded state.
NTF trapStatusDown	1.3.6.1.4.1.674.11000.2000.500.1.251.0.3			Deprecated: Storage Center Trap in Down state.
NTF trapStatusInform	1.3.6.1.4.1.674.11000.2000.500.1.251.0.4			Deprecated: Storage Center Trap in Inform state.
NTF trapStatusCritical	1.3.6.1.4.1.674.11000.2000.500.1.251.0.5			Deprecated: Storage Center Trap in Critical state.
NTF trapStatusComplete	1.3.6.1.4.1.674.11000.2000.500.1.251.0.6			Deprecated: Storage Center Trap in Complete state.
NTF trapStatusEmergency	1.3.6.1.4.1.674.11000.2000.500.1.251.0.7			Deprecated: Storage Center Trap in Emergency state.
NTF trapStatusUnavailable	1.3.6.1.4.1.674.11000.2000.500.1.251.0.8			Deprecated: Storage Center Trap in Unavailable state.
NTF trapStatusTest	1.3.6.1.4.1.674.11000.2000.500.1.251.0.100			Deprecated: Storage Center Trap in Test state.
NTF trapStatusTestSpecific	1.3.6.1.4.1.674.11000.2000.500.1.251.0.101			Deprecated: Storage Center Trap in Test Specific state.
NTF scTestTrap	1.3.6.1.4.1.674.11000.2000.500.1.251.0.200			Test Trap.
NTF scMiscAlert	1.3.6.1.4.1.674.11000.2000.500.1.251.0.201			This trap is used for all alerts that have no other specific trap definition associated with them
NTF scDiskStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.202			Disk status change.
NTF scCtlrStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.203			Controller status change.
NTF scCtlrCompStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.204			Controller Component status change. scHWCompState contains current component state when scHWCompType = tempsensor, voltagesensor, or fan.
NTF scEnclStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.205			Enclosure status change.
NTF scEnclCompStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.206			Enclosure Component status change. scHWCompState contains current temperature when scHWCompType = tempsensor.
NTF scDiskFolderStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.207			Disk Folder status change.
NTF scVolumeStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.208			Volume status change.
NTF scServerStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.209			Managed Server status change.
NTF scCacheStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.210			Cache status change.
NTF scLocalPortCondStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.211			Local Front-end Port Condition status change.
NTF scMonitoredUPSStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.212			Monitored UPS status change.
NTF scSIDeviceStatusChange	1.3.6.1.4.1.674.11000.2000.500.1.251.0.213			SCSI Initiator Device status change.

RFC description

Dell Storage Center enterprise SAN management MIB; vendor-private.

Start monitoring Dell Storage Center/Compellent SC-series SAN array with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DELL-STORAGE-SC-MIB

What Is DELL-STORAGE-SC-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description