DASAN-ACCESS-SLOT-POTS-MIB

All MIBs › DASAN-ACCESS-SLOT-POTS-MIB

Organization: DASAN Networks

Last Updated: 2005-06-11

Category: Telephony/VoIP

Description: Manages POTS analog telephone interface parameters on DASAN Networks access slot cards.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-ACCESS-SLOT-POTS-MIB?

DASAN-ACCESS-SLOT-POTS-MIB is a DASAN Networks (now DASAN Zhone/DZS) access gateway MIB for managing plain old telephone service (POTS) analog line card parameters on slot-based access node hardware, part of DASAN's broadband/telephony access gateway product line. No sample objects were extracted, so the specific table/object structure cannot be confirmed here, but based on its purpose it would expose per-slot, per-port analog line configuration and status such as loop state, line coding, and signaling parameters for each POTS port card. Its monitoring value would center on line/port operational status (in-service, on-hook/off-hook, fault) for analog telephony ports rather than data-plane traffic statistics. It is likely part of a broader DASAN "Access Gateway Management Information Base" family, as suggested by its module description, alongside sibling MIBs for other slot/card types on the same chassis. It would be deployed on DASAN access gateway chassis delivering POTS analog telephony service alongside broadband access in carrier or MDU (multi-dwelling unit) deployments, where a DASAN-ACCESS-SLOT-POTS-MIB download would be needed to load the module into a MIB browser for slot-level POTS monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-ACCESS-SLOT-POTS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN Networks (DZS) access gateway chassis with POTS line cards

Monitoring Examples

No object or table names were available in the extracted metadata for this module, so a concrete monitoring scenario cannot be honestly constructed beyond the general expectation of per-slot POTS line status objects implied by the module's short description and its place in the DASAN Access Gateway MIB family.

Imported Objects

From DASAN-SMI

dasanMgmt

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

BITS
Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
mib-2

From SNMPv2-TC

AutonomousType
DisplayString
RowStatus
TEXTUAL-CONVENTION
TestAndIncr
TimeStamp

OIDs

OID symbolic	OID numeric	Type	Access	Description
dasanAccessMib	1.3.6.1.4.1.6296.9.100			Access Gateway Management Information Base (MIB)
dasanAccGatewayMIBObjects	1.3.6.1.4.1.6296.9.100.2
dsAccGwyPots	1.3.6.1.4.1.6296.9.100.2.1
dsAccGwyPotsConfiguration	1.3.6.1.4.1.6296.9.100.2.1.1
dsAccGwyConfigPotsSystem	1.3.6.1.4.1.6296.9.100.2.1.1.1
STR dsAccGwyConfigGlobalDigitmap	1.3.6.1.4.1.6296.9.100.2.1.1.1.1	DisplayString	read-write	Input digit-mapping rule.
STR dsAccGwyConfigGlobalSwitchDhcp	1.3.6.1.4.1.6296.9.100.2.1.1.1.2	DisplayString	read-write	Config whether the ip-address of switch is assigned by DHCP Server or not.
dsAccGwyConfigPotsSlot	1.3.6.1.4.1.6296.9.100.2.1.1.2
dsAccGwyConfigSlotTable	1.3.6.1.4.1.6296.9.100.2.1.1.2.1		not-accessible	A list of AGLU ConfigEntry objects.
dsAccGwyConfigSlotEntry	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1		not-accessible	A configuration entry of AGLU Functions for each slot.
INT dsSlotIndex	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.1	INTEGER	read-only	Slot-Index
INT dsSlotAddAreaCode	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.2	INTEGER	read-write	Use of Adding AreaCode
STR dsSlotAreaCode	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.3	DisplayString	read-write	Auto area number used when AddAreaCode is set to 'on'
STR dsSlotAreaCodeAllows	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.4	DisplayString	read-write	If started with this value, it's going to apply for auto-area-number exception rule. For example, in case of AreaCodeAllows value is set to '88', auto-area-number[031] and Input phone number [887251234#], the number is [88 031 7251234]. And, in case of Input phone number [880161234567#], the area-number isn't going to be inserted into input phone number. The result is [**880161234567#]
STR dsSlotAreaCodeExceptions	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.5	DisplayString	read-write	If started with this value, the phone number doesn't need the area-number.
STR dsSlotCodecType	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.6	DisplayString	read-write	Codec list to be used, ordered by priority
INT dsSlotCodecPacketizationPeriodG711	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.7	INTEGER	read-write	Packet generation cycle of G.711 codec
INT dsSlotCodecPacketizationPeriodG723	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.8	INTEGER	read-write	Packet generation cycle of G.723 codec
INT dsSlotCodecPacketizationPeriodG729	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.9	INTEGER	read-write	Packet generation cycle of G.729 codec
STR dsSlotJitterbuffer	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.10	DisplayString	read-only	Use of Jitterbuffer and jitterbuffer size
INT dsSlotRingonTime	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.11	INTEGER	read-write	Ring-on-Time length
INT dsSlotRingoffTime	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.12	INTEGER	read-write	Ring-off-Time length
INT dsSlotHookflashMin	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.13	INTEGER	read-write	Minimum hook flash threshold time to recognize Hook-flash
INT dsSlotHookflashMax	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.14	INTEGER	read-write	Maximum hook flash threshold time to recognize Hook-flash
INT dsSlotInterdigitTimeout	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.15	INTEGER	read-write	Interdigit Timeout value
STR dsSlotEce	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.16	DisplayString	read-only	Use of Echo Canceler and level
INT dsSlotFax	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.17	INTEGER	read-write	Use of Fax
INT dsSlotCid	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.18	INTEGER	read-write	Use of Caller ID [Belcore type, NTT type, no use]
INT dsSlotVad	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.19	INTEGER	read-write	Use of Voice Activation Detection.
INT dsSlotCng	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.20	INTEGER	read-write	Use of Comfortable Noise Generation
INT dsSlotOobdtmf	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.21	INTEGER	read-write	Use of Out-of-Band DTMF
STR dsSlotNetworkHostname	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.22	DisplayString	read-only	Hostname of slot[AGLU]
INT dsSlotNetworkDhcp	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.23	INTEGER	read-write	Use of Network-Dhcp for slot[AGLU] to get ip address
STR dsSlotNetworkIpaddress	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.24	DisplayString	read-write	IP address of slot[AGLU]
STR dsSlotNetworkSubnetmask	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.25	DisplayString	read-write	Subnetmask for slot[AGLU]
STR dsSlotNetworkRouter	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.26	DisplayString	read-write	Gateway Router address for slot[AGLU]
STR dsSlotNetworkNameserver	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.27	DisplayString	read-write	Domain Nameserver address for slot[AGLU]
STR dsSlotVersion	1.3.6.1.4.1.6296.9.100.2.1.1.2.1.1.28	DisplayString	read-only	Version of slot image[AGLU]
dsAccGwyConfigPotsPort	1.3.6.1.4.1.6296.9.100.2.1.1.3
dsAccGwyConfigPortTable	1.3.6.1.4.1.6296.9.100.2.1.1.3.1		not-accessible	A list of AGLU ConfigEntry objects.
dsAccGwyConfigPortEntry	1.3.6.1.4.1.6296.9.100.2.1.1.3.1.1		not-accessible	Config AGLU Functions for each slot.
INT dsPortIndex	1.3.6.1.4.1.6296.9.100.2.1.1.3.1.1.1	INTEGER	read-only	AccessGateway Board(AGLU) port Index
INT dsPortIvol	1.3.6.1.4.1.6296.9.100.2.1.1.3.1.1.2	INTEGER	read-write	Input volume of AGLU port.
INT dsPortOvol	1.3.6.1.4.1.6296.9.100.2.1.1.3.1.1.3	INTEGER	read-write	Output volume of AGLU port.
dsAccGwyPotsMonitor	1.3.6.1.4.1.6296.9.100.2.1.2
dsAccGwyMonitorPotsSystem	1.3.6.1.4.1.6296.9.100.2.1.2.1
STR dsMonitorAccGwyUpsStatus	1.3.6.1.4.1.6296.9.100.2.1.2.1.1	DisplayString	read-only	This object shows the UPS status.
dsAccGwyMonitorPotsSlot	1.3.6.1.4.1.6296.9.100.2.1.2.2
dsAccGwyMonitorSlotTable	1.3.6.1.4.1.6296.9.100.2.1.2.2.1		not-accessible	A list of AGLU Config Entry objects.
dsAccGwyMonitorSlotEntry	1.3.6.1.4.1.6296.9.100.2.1.2.2.1.1		not-accessible	Config AGLU Functions for each slot.
INT dsMonitorSlotIndex	1.3.6.1.4.1.6296.9.100.2.1.2.2.1.1.1	INTEGER	read-only	AGLU Slot Index of a System
INT dsMonitorSlotInstallStatus	1.3.6.1.4.1.6296.9.100.2.1.2.2.1.1.2	INTEGER	read-only	AGLU concurrent slot status
dsAccGwyMonitorPotsPort	1.3.6.1.4.1.6296.9.100.2.1.2.3
dsAccGwyMonitorPortTable	1.3.6.1.4.1.6296.9.100.2.1.2.3.1		not-accessible	A list of AGLU Config Entry objects.
dsAccGwyMonitorPortEntry	1.3.6.1.4.1.6296.9.100.2.1.2.3.1.1		not-accessible	Config AGLU Functions for each slot.
INT dsMonitorPortIndex	1.3.6.1.4.1.6296.9.100.2.1.2.3.1.1.1	INTEGER	read-only	AGLU Board port Index
STR dsMonitorPortStatus	1.3.6.1.4.1.6296.9.100.2.1.2.3.1.1.2	DisplayString	read-only	AGLU port Status
STR dsMonitorPortStatistics	1.3.6.1.4.1.6296.9.100.2.1.2.3.1.1.3	DisplayString	read-only	AGLU port Statistics
dsAccGwyPotsControl	1.3.6.1.4.1.6296.9.100.2.1.3
dsAccGwyControlPotsSlot	1.3.6.1.4.1.6296.9.100.2.1.3.1
dsAccGwyControlSlotTable	1.3.6.1.4.1.6296.9.100.2.1.3.1.1		not-accessible	A list of AGLU Config Entry objects.
dsAccGwyControlSlotEntry	1.3.6.1.4.1.6296.9.100.2.1.3.1.1.1		not-accessible	Config AGLU Functions for each slot.
INT dsControlSlotIndex	1.3.6.1.4.1.6296.9.100.2.1.3.1.1.1.1	INTEGER	read-only	AGLU Slot Index of a System
INT dsControlSlotPotsRestart	1.3.6.1.4.1.6296.9.100.2.1.3.1.1.1.2	INTEGER	read-write	AGLU function restart
INT dsControlSlotRestart	1.3.6.1.4.1.6296.9.100.2.1.3.1.1.1.3	INTEGER	read-write	AGLU slot restart
dsAccGwyControlPotsPort	1.3.6.1.4.1.6296.9.100.2.1.3.2
dsAccGwyControlPortTable	1.3.6.1.4.1.6296.9.100.2.1.3.2.1		not-accessible	A list of AGLU Config Entry objects.
dsAccGwyControlPortEntry	1.3.6.1.4.1.6296.9.100.2.1.3.2.1.1		not-accessible	Config AGLU Functions for each port.
INT dsControlPortIndex	1.3.6.1.4.1.6296.9.100.2.1.3.2.1.1.1	INTEGER	read-only	AGLU Port Index of a System
INT dsControlPortReset	1.3.6.1.4.1.6296.9.100.2.1.3.2.1.1.2	INTEGER	read-write	Reset each port
INT dsControlPortPortBlock	1.3.6.1.4.1.6296.9.100.2.1.3.2.1.1.3	INTEGER	read-write	Admin AGLU port

RFC description

Dasan Zhone vendor-private MIB for managing POTS (Plain Old Telephone Service) access slot hardware.

Start monitoring DASAN Networks (DZS) access gateway (POTS line cards) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-ACCESS-SLOT-POTS-MIB

What Is DASAN-ACCESS-SLOT-POTS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description