All MIBs › CPQSASSWITCH-MIB › cpqSasSwitchHwRedundancyState
cpqSasSwitchHwRedundancyState
Module: CPQSASSWITCH-MIB
OID (symbolic): CPQSASSWITCH-MIB::cpqSasSwitchHwRedundancyState
OID (numeric): 1.3.6.1.4.1.232.25.2.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The Redundancy State for the SAS Switch.
The switch can be in one of the following redundant states:
other(1) The switch is in a state other than one of those listed below.
active(2) Indicates that the switch is acting in a redundant configuration and the switch is operating in the active state. No user action is necessary.
standby(3) Indicates that the switch is acting in a redundant configuration and the switch is operating in the standby state. No user action is necessary.
notConfigured(4) Indicates that the switch is in a non redundant configuration and the switch not configured correctly since the switch has been moved from a different location. User action is required.
notRedundant(5) Indicates that the switch is operating is a non redundant configuration. No user action is necessary.
degraded(6) Indicates that the switch cannot communicate with its partner switch. User action is necessary.
mismatch(7) Indicates that there is a mismatch in firmware versions or zoning configurations between the redundant switches. User action is necessary to upgrade firmware or select desired zoning configuration by forcing appropriate switch to active state.
What is cpqSasSwitchHwRedundancyState?
This read-only INTEGER reports the SAS switch's redundancy state, with defined values including other, active, standby, notConfigured, notRedundant, degraded, and mismatch. It tells an admin whether a redundant switch pair is functioning correctly, with one member active and one standby, or whether that redundancy has been lost or misconfigured. For example, a switch reporting mismatch(7) tells an admin the redundant pair's configuration disagrees between the two units and needs reconciling before a failure actually tests the redundancy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.25.2.2.3 snmpwalk -v2c -c public <target> CPQSASSWITCH-MIB::cpqSasSwitchHwRedundancyState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.25.2.2.3.1 snmpget -v2c -c public <target> CPQSASSWITCH-MIB::cpqSasSwitchHwRedundancyState.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cpqSasSwitchHwRedundancyState.1
Start monitoring HP (Compaq) ProLiant server (SAS switch interconnect) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQSASSWITCH-MIB::cpqSasSwitchHwRedundancyState OID value, configure state conditions and alerts, and monitor any HP (Compaq) ProLiant server (SAS switch interconnect) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.25 | cpqSasSwitch | CPQSASSWITCH-MIB |
| 1.3.6.1.4.1.232.25.2 | cpqSasSwitchComponent | CPQSASSWITCH-MIB |
| 1.3.6.1.4.1.232.25.2.2 | cpqSasSwitchHw | CPQSASSWITCH-MIB |
| 1.3.6.1.4.1.232.25.2.2.3 | cpqSasSwitchHwRedundancyState | CPQSASSWITCH-MIB |