All MIBs › CM-PERFORMANCE-MIB › f3AclRuleThresholdValueHi
f3AclRuleThresholdValueHi
Module: CM-PERFORMANCE-MIB
OID (symbolic): CM-PERFORMANCE-MIB::f3AclRuleThresholdValueHi
OID (numeric): 1.3.6.1.4.1.2544.1.12.5.1.72.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description:
Higher 32 bits of the threshold value.
What is f3AclRuleThresholdValueHi?
This object holds the upper 32 bits of a 64-bit threshold value used in ACL rule matching logic. Network operators configure this along with the lower 32 bits to define numeric thresholds for filtering or policing traffic based on specific criteria. This allows setting very large threshold values for packet counts or byte rates.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.5.1.72.1.5 snmpwalk -v2c -c public <target> CM-PERFORMANCE-MIB::f3AclRuleThresholdValueHi
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2544.1.12.5.1.72.1.5.1 snmpget -v2c -c public <target> CM-PERFORMANCE-MIB::f3AclRuleThresholdValueHi.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2544.1.12.5.1.72.1.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2544 | advaMIB | ADVA-MIB |
| 1.3.6.1.4.1.2544.1 | products | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12 | fsp150cm | ADVA-MIB |
| 1.3.6.1.4.1.2544.1.12.5 | cmPerformanceMIB | CM-PERFORMANCE-MIB |
| 1.3.6.1.4.1.2544.1.12.5.1 | cmPerfObjects | CM-PERFORMANCE-MIB |
| 1.3.6.1.4.1.2544.1.12.5.1.72 | f3AclRuleThresholdTable | CM-PERFORMANCE-MIB |
| 1.3.6.1.4.1.2544.1.12.5.1.72.1 | f3AclRuleThresholdEntry | CM-PERFORMANCE-MIB |
| 1.3.6.1.4.1.2544.1.12.5.1.72.1.5 | f3AclRuleThresholdValueHi | CM-PERFORMANCE-MIB |