All MIBs › CISCO-XGCP-MIB › cXgcpConnMode
cXgcpConnMode
Module: CISCO-XGCP-MIB
OID (symbolic): CISCO-XGCP-MIB::cXgcpConnMode
OID (numeric): 1.3.6.1.4.1.9.9.318.1.4.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Represents possible MG connection modes. invalid - Invalid value for mode sendOnly - The GW should only send packets recvOnly - The GW should only receive packets sendRecv - The GW can send and receive packets inActive - The GW should neither send nor receive packets loopBack - The GW should place the circuit in loopback mode contTest - The GW should place the circuit in test mode data - The GW should use the circuit for network access for data netwLoop - The GW should place the connection in network loopback mode netwTest - The GW should place the connection in network continuity test mode conference - The GW should place the connection in conference mode.
What is cXgcpConnMode?
This read-only INTEGER reports the current mode of an MG connection, such as sendOnly, recvOnly, sendRecv, inActive, loopBack, or contTest, describing what direction of media flow (if any) the gateway is configured for on that connection. Admins use it to quickly understand why a call might have one-way or no audio without needing to inspect signaling logs. For example, if a caller reports hearing nothing while being heard fine, an admin might check this object and find the connection is stuck in recvOnly mode rather than sendRecv.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.318.1.4.1.1.6 snmpwalk -v2c -c public <target> CISCO-XGCP-MIB::cXgcpConnMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.318.1.4.1.1.6.1 snmpget -v2c -c public <target> CISCO-XGCP-MIB::cXgcpConnMode.1
Start monitoring Cisco VoIP/VoATM media gateway / Media Gateway Controller (MGC) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-XGCP-MIB::cXgcpConnMode OID value, configure state conditions and alerts, and monitor any Cisco VoIP/VoATM media gateway / Media Gateway Controller (MGC) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.318 | ciscoXgcpMIB | CISCO-XGCP-MIB |
| 1.3.6.1.4.1.9.9.318.1 | cXgcpObjects | CISCO-XGCP-MIB |
| 1.3.6.1.4.1.9.9.318.1.4 | cXgcpConnection | CISCO-XGCP-MIB |
| 1.3.6.1.4.1.9.9.318.1.4.1 | cXgcpConnectionTable | CISCO-XGCP-MIB |
| 1.3.6.1.4.1.9.9.318.1.4.1.1 | cXgcpConnectionEntry | CISCO-XGCP-MIB |
| 1.3.6.1.4.1.9.9.318.1.4.1.1.6 | cXgcpConnMode | CISCO-XGCP-MIB |