CISCO-XGCP-EXT-MIB :: cxeCcProfileMgcGrpNum

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-XGCP-EXT-MIBcxeCcProfileMgcGrpNum

cxeCcProfileMgcGrpNum

Module: CISCO-XGCP-EXT-MIB

OID (symbolic): CISCO-XGCP-EXT-MIB::cxeCcProfileMgcGrpNum

OID (numeric): 1.3.6.1.4.1.9.9.325.1.1.2.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-create

Description: This object indicates which MGC Redundant group number that the call control profile will be used. The value is the index to MGC Redundant Group Table (cMgcGrpParamTable).

There are two conditions for associating a MGC group with a profile: 1. At least one MGC is associated with the MGC group 2. At least one protocol is associated with the MGC group

After a MGC Redundant Group is associated with the profile (cxeCcProfileMgcGrpNum > 0): In the call setup, the parameters of MGCs within the MGC Redundant Group will be sequentially tried according to its preference.

The value of '0' means there is no MGC Redundant Group associated with the profile.

This object takes the precedence of object cxeCcProfileMgcAddress of the profile. If users try to set a value to cxeCcProfileMgcAddress while the value of this object is non-zero, the set will be rejected.

Before the call control profile can be deleted, this object should have the value of 0. Which means MGC Redundant Group should be de-associated with the profile before the profile can be deleted.

What is cxeCcProfileMgcGrpNum?

This read-create Integer32 (0-128) indicates which MGC Redundant Group, indexed into the MGC Redundant Group Table, a call control profile uses, requiring at least one MGC and one protocol already associated with that group. Admins rely on this to give a profile automatic MGC failover coverage instead of a single hardcoded controller address. For example, an admin standardizing several gateways on a shared redundant MGC pool would set this object to the group number rather than configuring a fixed MGC address per profile.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.325ciscoXgcpExtMIBCISCO-XGCP-EXT-MIB
1.3.6.1.4.1.9.9.325.1cxgcpExtObjectsCISCO-XGCP-EXT-MIB
1.3.6.1.4.1.9.9.325.1.1cxgcpExtConfigCISCO-XGCP-EXT-MIB
1.3.6.1.4.1.9.9.325.1.1.2cxeCallCtrlProfileTableCISCO-XGCP-EXT-MIB
1.3.6.1.4.1.9.9.325.1.1.2.1cxeCallCtrlProfileEntryCISCO-XGCP-EXT-MIB
1.3.6.1.4.1.9.9.325.1.1.2.1.4cxeCcProfileMgcGrpNumCISCO-XGCP-EXT-MIB