All MIBs › CISCO-XGCP-EXT-MIB › cxeCallCtrlVselDselFselSupport
cxeCallCtrlVselDselFselSupport
Module: CISCO-XGCP-EXT-MIB
OID (symbolic): CISCO-XGCP-EXT-MIB::cxeCallCtrlVselDselFselSupport
OID (numeric): 1.3.6.1.4.1.9.9.325.1.1.1.1.19
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object is used to enable or disable VSEL, DSEL and FSEL support.
VSEL: Voice codec, packet length and packet times Selection DSEL: Data codec, packet length and packet times Selection FSEL: Fax codec, packet length and packet times Selection
If cxeCallCtrlVselDselFselSupport is true, then the media gateway must indicate prefered codec, packet length and packet times for an ATM connection.
What is cxeCallCtrlVselDselFselSupport?
This read-write TruthValue enables or disables VSEL, DSEL, and FSEL support, which govern voice, data, and fax codec/packet-length/packet-time selection respectively for ATM connections. When enabled, the media gateway must indicate its preferred codec, packet length, and packet timing for a given ATM connection rather than relying on defaults. For example, an admin setting up an ATM voice trunk that needs the gateway to actively negotiate codec and packet-timing preferences would set this object to true.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.325.1.1.1.1.19 snmpwalk -v2c -c public <target> CISCO-XGCP-EXT-MIB::cxeCallCtrlVselDselFselSupport
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.325.1.1.1.1.19.1 snmpget -v2c -c public <target> CISCO-XGCP-EXT-MIB::cxeCallCtrlVselDselFselSupport.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.325.1.1.1.1.19.1 s <value>
Start monitoring Cisco voice/media gateway / media gateway controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-XGCP-EXT-MIB::cxeCallCtrlVselDselFselSupport OID value, configure state conditions and alerts, and monitor any Cisco voice/media gateway / media gateway controller from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.325 | ciscoXgcpExtMIB | CISCO-XGCP-EXT-MIB |
| 1.3.6.1.4.1.9.9.325.1 | cxgcpExtObjects | CISCO-XGCP-EXT-MIB |
| 1.3.6.1.4.1.9.9.325.1.1 | cxgcpExtConfig | CISCO-XGCP-EXT-MIB |
| 1.3.6.1.4.1.9.9.325.1.1.1 | cxeCallCtrlConfigTable | CISCO-XGCP-EXT-MIB |
| 1.3.6.1.4.1.9.9.325.1.1.1.1 | cxeCallCtrlConfigEntry | CISCO-XGCP-EXT-MIB |
| 1.3.6.1.4.1.9.9.325.1.1.1.1.19 | cxeCallCtrlVselDselFselSupport | CISCO-XGCP-EXT-MIB |