CISCO-WAN-SRM-BERT-MIB :: bertUserId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-SRM-BERT-MIBbertUserId

bertUserId

Module: CISCO-WAN-SRM-BERT-MIB

OID (symbolic): CISCO-WAN-SRM-BERT-MIB::bertUserId

OID (numeric): 1.3.6.1.4.1.351.110.6.1.4

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: This identifies the user who wants to do a SET operation on this group. This will be compared against bertOwner and access will be given only if it matches. Hence, for every SET request, this object should have a valid value. If the user is a CLI user, then this is username. If it is SNMP Manager, then this would be the IP address. For example, this value can be, 192.9.209.157 within quotes. Required for bert operations.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.4
snmpwalk -v2c -c public <target> CISCO-WAN-SRM-BERT-MIB::bertUserId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.4.1
snmpget -v2c -c public <target> CISCO-WAN-SRM-BERT-MIB::bertUserId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.6.1.4.1 s <value>

Start monitoring Cisco MGX 8220/8850 WAN switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SRM-BERT-MIB::bertUserId OID value, configure state conditions and alerts, and monitor any Cisco MGX 8220/8850 WAN switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.6axisDiagnosticsBASIS-MIB
1.3.6.1.4.1.351.110.6.1bertCISCO-WAN-AXIPOP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.6.1.4bertUserIdCISCO-WAN-SRM-BERT-MIB