All MIBs › CISCO-WAN-SRM-BERT-MIB › bertDeviceToLoop
bertDeviceToLoop
Module: CISCO-WAN-SRM-BERT-MIB
OID (symbolic): CISCO-WAN-SRM-BERT-MIB::bertDeviceToLoop
OID (numeric): 1.3.6.1.4.1.351.110.6.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This shows the type of the end device and the type of the loopback used (latching/nonlatching/polynomial).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.11 snmpwalk -v2c -c public <target> CISCO-WAN-SRM-BERT-MIB::bertDeviceToLoop
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.1.11.1 snmpget -v2c -c public <target> CISCO-WAN-SRM-BERT-MIB::bertDeviceToLoop.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.6.1.11.1 i <value>
Start monitoring Cisco MGX 8220/8850 WAN switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-SRM-BERT-MIB::bertDeviceToLoop OID value, configure state conditions and alerts, and monitor any Cisco MGX 8220/8850 WAN switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6 | axisDiagnostics | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6.1 | bert | CISCO-WAN-AXIPOP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.6.1.11 | bertDeviceToLoop | CISCO-WAN-SRM-BERT-MIB |