All MIBs › CISCO-WAN-PAR-MIB › parTrkCnfgLineType
parTrkCnfgLineType
Module: CISCO-WAN-PAR-MIB
OID (symbolic): CISCO-WAN-PAR-MIB::parTrkCnfgLineType
OID (numeric): 1.3.6.1.4.1.351.130.2.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the type of interface terrestrial or satellite. The interfaces configured as terrestrial(1) are preferred over those configured as satellite(2) for routing control plane traffic. This information is also used for connections for which routing restrictions are specified.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.130.2.2.1.4 snmpwalk -v2c -c public <target> CISCO-WAN-PAR-MIB::parTrkCnfgLineType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.130.2.2.1.4.1 snmpget -v2c -c public <target> CISCO-WAN-PAR-MIB::parTrkCnfgLineType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.130.2.2.1.4.1 i <value>
Start monitoring Cisco WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-PAR-MIB::parTrkCnfgLineType OID value, configure state conditions and alerts, and monitor any Cisco WAN switches from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.130 | par | BASIS-MIB |
| 1.3.6.1.4.1.351.130.2 | parInterfaces | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.130.2.2 | parTrkTable | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.130.2.2.1 | parTrkEntry | CISCO-WAN-AXIPOP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.130.2.2.1.4 | parTrkCnfgLineType | CISCO-WAN-PAR-MIB |