CISCO-WAN-PAR-MIB :: parTrkCnfgCcRestrict

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-PAR-MIBparTrkCnfgCcRestrict

parTrkCnfgCcRestrict

Module: CISCO-WAN-PAR-MIB

OID (symbolic): CISCO-WAN-PAR-MIB::parTrkCnfgCcRestrict

OID (numeric): 1.3.6.1.4.1.351.130.2.2.1.3

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies the operators preference for routing control plane traffic on the interface. If the object is set to False, then the interface may be chosen for control plane traffic. If it is True, then the interface is not chosen, unless there is no other trunk with parIfOperStatus added(2), in which case it is chosen regardless of the value of this object.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.130.2.2.1.3
snmpwalk -v2c -c public <target> CISCO-WAN-PAR-MIB::parTrkCnfgCcRestrict

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.130.2.2.1.3.1
snmpget -v2c -c public <target> CISCO-WAN-PAR-MIB::parTrkCnfgCcRestrict.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.130.2.2.1.3.1 s <value>

Start monitoring Cisco WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-PAR-MIB::parTrkCnfgCcRestrict OID value, configure state conditions and alerts, and monitor any Cisco WAN switches from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.130parBASIS-MIB
1.3.6.1.4.1.351.130.2parInterfacesCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.130.2.2parTrkTableCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.130.2.2.1parTrkEntryCISCO-WAN-AXIPOP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.130.2.2.1.3parTrkCnfgCcRestrictCISCO-WAN-PAR-MIB