All MIBs › CISCO-WAN-PAR-MIB › parCmParmsUseDelay
parCmParmsUseDelay
Module: CISCO-WAN-PAR-MIB
OID (symbolic): CISCO-WAN-PAR-MIB::parCmParmsUseDelay
OID (numeric): 1.3.6.1.4.1.351.130.5.2.16
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object can be configured to enable or disable cost based route selection from considering end-to-end delay associated with the routes. If the value of this object is true(1), the delay would be considered otherwise daley would not be considered during routing of connection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.130.5.2.16 snmpwalk -v2c -c public <target> CISCO-WAN-PAR-MIB::parCmParmsUseDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.130.5.2.16.1 snmpget -v2c -c public <target> CISCO-WAN-PAR-MIB::parCmParmsUseDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.130.5.2.16.1 s <value>
Start monitoring Cisco WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-PAR-MIB::parCmParmsUseDelay OID value, configure state conditions and alerts, and monitor any Cisco WAN switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.130 | par | BASIS-MIB |
| 1.3.6.1.4.1.351.130.5 | parConfigParms | CISCO-WAN-AXIPOP-MIB |
| 1.3.6.1.4.1.351.130.5.2 | parCmParms | CISCO-WAN-AXIPOP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.130.5.2.16 | parCmParmsUseDelay | CISCO-WAN-PAR-MIB |