CISCO-WAN-FR-CONN-MIB :: frChanOamCCEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-FR-CONN-MIBfrChanOamCCEnable

frChanOamCCEnable

Module: CISCO-WAN-FR-CONN-MIB

OID (symbolic): CISCO-WAN-FR-CONN-MIB::frChanOamCCEnable

OID (numeric): 1.3.6.1.4.1.351.110.5.1.2.1.1.1.66

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is added for FRSM12 card.

This object serves to enable or disable continuity check(CC) on a connection endpoint. When continuity check is enabled on an endpoint, the endpoint anticipates OAM CC cells from its peer endpoint. OAM CC cells are sent when the peer endpoint does not have traffic cells to send. If the connection is idle and this endpoint has not received OAM CC cells for a period of 3.5 +/- 0.5 seconds, it declares continuity failure.

This object serves to administratively control the CC feature. Typical implementations (of this feature) may choose to ignore this control or impose other conditions to actually enable CC cell flow. However, if this object is set to false(2), then this feature should be disabled

This object is not applicable to MGX Release 1.x.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.66
snmpwalk -v2c -c public <target> CISCO-WAN-FR-CONN-MIB::frChanOamCCEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.66.1
snmpget -v2c -c public <target> CISCO-WAN-FR-CONN-MIB::frChanOamCCEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.1.2.1.1.1.66.1 i <value>

Start monitoring Cisco MGX/BPX WAN switch (Frame Relay connections, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-FR-CONN-MIB::frChanOamCCEnable OID value, configure state conditions and alerts, and monitor any Cisco MGX/BPX WAN switch (Frame Relay connections, legacy) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.1frameRelayBASIS-MIB
1.3.6.1.4.1.351.110.5.1.2frChanBASIS-MIB
1.3.6.1.4.1.351.110.5.1.2.1frChanCnfGrpCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.2.1.1frChanCnfGrpTableCISCO-WAN-AXIPOP-MIB
1.3.6.1.4.1.351.110.5.1.2.1.1.1frChanCnfGrpEntryCISCO-WAN-AXIPOP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.1.2.1.1.1.66frChanOamCCEnableCISCO-WAN-FR-CONN-MIB