CISCO-WAN-BBIF-ATM-CONN-MIB :: bbChanCnfGrpTable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-BBIF-ATM-CONN-MIBbbChanCnfGrpTable

bbChanCnfGrpTable

Module: CISCO-WAN-BBIF-ATM-CONN-MIB

OID (symbolic): CISCO-WAN-BBIF-ATM-CONN-MIB::bbChanCnfGrpTable

OID (numeric): 1.3.6.1.4.1.351.110.5.2.7.1.1

Node type: OBJECT-TYPE

Access: not-accessible

Description: The Broadband Channel config table is for a channel on logical interface. There will an entry for each of the channel added on the logical partition of the physical line.

Following parameters are needed if the connection is from a PXM user port and policing is enabled. These apply to connection on PXM lines confiured as user port only.

PCR/CDVT is used for GCRA1 and SCR/MBS is used for GCRA2 UpcEnable UpcPCR UpcCDVT UpcSCRPolicing for CBR conns. UpcPCR0 UpcCDVT0 for non CBR conns. UpcSCR UpcMBS

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.2atmBASIS-MIB
1.3.6.1.4.1.351.110.5.2.7bbChanBASIS-MIB
1.3.6.1.4.1.351.110.5.2.7.1bbChanCnfGrpBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.2.7.1.1bbChanCnfGrpTableCISCO-WAN-BBIF-ATM-CONN-MIB