All MIBs › CISCO-VISM-MODULE-MIB › vismRtcpRecvMultiplier
vismRtcpRecvMultiplier
Module: CISCO-VISM-MODULE-MIB
OID (symbolic): CISCO-VISM-MODULE-MIB::vismRtcpRecvMultiplier
OID (numeric): 1.3.6.1.4.1.351.110.3.17.2.14
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The object vismRtcpRepInterval specified above defines an approximate RTCP report interval (defined in RFC 1889) which indicates the interval in milliseconds at which the RTCP reports should be sent to the participating members.
The object vismRtcpRecvMultiplier defines how many times the RTCP reports may fail before exception condition activity may be done.
The number of times specified in this MIB object times the RTCP Report Interval, a check is made on a VoIP connection (which is in SENDRECV or RECVONLY xGCP modes) to see if any RTP packets have been received. If not, gateway-initiated DLCX should be sent to the call agent.
Currently, this interval multiplier is a card-specific value, which means the value is configurable on a per card basis and not on a per call basis.
This value is applicable for VoIP adaptation only.
What is vismRtcpRecvMultiplier?
This Integer32 (1..10) defines how many times RTCP reports may fail to be received, relative to vismRtcpRepInterval, before exception-condition activity is triggered. This lets an admin control how tolerant the card is to missed RTCP reports before treating a call's quality-monitoring channel as failed, balancing false alarms against slow detection of real problems. For example, an admin on a lossy IP path might increase vismRtcpRecvMultiplier so a few missed RTCP reports don't immediately trigger unnecessary exception handling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.2.14 snmpwalk -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismRtcpRecvMultiplier
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.2.14.1 snmpget -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismRtcpRecvMultiplier.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.3.17.2.14.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-MODULE-MIB::vismRtcpRecvMultiplier OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.3 | cardSpecific | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.3.17 | vismConfig | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.2 | vismVoIpGrp | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.2.14 | vismRtcpRecvMultiplier | CISCO-VISM-MODULE-MIB |