All MIBs › CISCO-VISM-MODULE-MIB › vismAppliedTemplate
vismAppliedTemplate
Module: CISCO-VISM-MODULE-MIB
OID (symbolic): CISCO-VISM-MODULE-MIB::vismAppliedTemplate
OID (numeric): 1.3.6.1.4.1.351.110.3.17.4.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This attribute describes the Codec template currently configured on the VISM card. The value refers to an index to the vismCodecTemplateCnfGrpTable (defined in CISCO-VISM-CODEC-MIB MIB). This template is applicable for all connections on the card.
When a switch is made to a new template, the number of channels (endpoints) in use will be checked to ensure the switch will not occur if there are more endpoints active at the present time than what the new template allow, the number of channels per template are specify in vismCodecTemplateMaxChanCount.
Also whenever an attempt is made to add a new endpoint for any template, this template maximum number will limit the number of endpoints that may be added for this template.
What is vismAppliedTemplate?
This read-only Integer32 (0..2147483647) describes the codec template currently configured on the VISM card, referencing an index into the vismCodecTemplateCnfGrpTable in CISCO-VISM-CODEC-MIB, and it applies to all connections on the card. Because switching templates is checked against the number of endpoints currently in use to avoid disrupting active calls, an admin needs awareness of current call volume before attempting to change this value. For example, an admin wanting to switch to a template supporting more codec variety would need to verify the current number of active endpoints won't block the switch before changing vismAppliedTemplate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.9 snmpwalk -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismAppliedTemplate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.9.1 snmpget -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismAppliedTemplate.1
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-MODULE-MIB::vismAppliedTemplate OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.3 | cardSpecific | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.3.17 | vismConfig | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.4 | vismSystemGrp | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.4.9 | vismAppliedTemplate | CISCO-VISM-MODULE-MIB |