All MIBs › CISCO-VISM-MODULE-MIB › vismAggregateTrafficClipping
vismAggregateTrafficClipping
Module: CISCO-VISM-MODULE-MIB
OID (symbolic): CISCO-VISM-MODULE-MIB::vismAggregateTrafficClipping
OID (numeric): 1.3.6.1.4.1.351.110.3.17.4.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute defines the aggregate traffic clipping policy which is applicable to all bearer traffic generated at VISM card. The applicable options are: 'disable' : aggregate traffic clipping is disabled, VISM card traffic management does not perform aggregate traffic clipping. 'enable' : aggregate traffic clipping is enabled, VISM card traffic management performs aggregate traffic clipping.
This is applicable to only AAL2 SVC voice bearer traffic.
When aggregate traffic clipping is enabled, VISM card can discard cells which are exceeding VISM card aggregate SVC bandwidth which is specified as vismAggregateSvcBandwidth value.
What is vismAggregateTrafficClipping?
This read-write INTEGER enables or disables aggregate traffic clipping, the VISM card's mechanism for limiting all bearer traffic generated on the card as a whole. An admin cares because turning this on activates card-wide traffic management enforcement rather than leaving bandwidth control purely to per-connection or per-PVC policies. For example, an operator worried about a VISM card exceeding its total provisioned bandwidth across all calls would set this to enable(2) to activate aggregate clipping.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.24 snmpwalk -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismAggregateTrafficClipping
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.4.24.1 snmpget -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismAggregateTrafficClipping.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.3.17.4.24.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-MODULE-MIB::vismAggregateTrafficClipping OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.3 | cardSpecific | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.3.17 | vismConfig | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.4 | vismSystemGrp | CISCO-VISM-MODULE-MIB |
| 1.3.6.1.4.1.351.110.3.17.4.24 | vismAggregateTrafficClipping | CISCO-VISM-MODULE-MIB |