CISCO-VISM-MODULE-MIB :: vismAal2VADTimer

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VISM-MODULE-MIBvismAal2VADTimer

vismAal2VADTimer

Module: CISCO-VISM-MODULE-MIB

OID (symbolic): CISCO-VISM-MODULE-MIB::vismAal2VADTimer

OID (numeric): 1.3.6.1.4.1.351.110.3.17.6.5

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This attribute defines the hangover time for VAD in milliseconds. Once the voice inactivity is detected, the gateway will wait for this duration before activating silence suppression on an AAL2 SVC/PVC.

The value in this object will be utilized when the call agent does not specify this in CRCX.

What is vismAal2VADTimer?

This read-write Integer32 (250-65535 milliseconds) sets the hangover time for Voice Activity Detection on an AAL2 SVC/PVC: after voice inactivity is detected, the gateway waits this long before actually activating silence suppression, and the value is only used when the call agent's CRCX does not override it. An admin cares because too short a hangover can clip the tail end of speech as false silence, while too long delays the bandwidth savings from silence suppression. For example, an operator noticing clipped word endings on calls might increase this timer so silence suppression activates less aggressively.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.6.5
snmpwalk -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismAal2VADTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.3.17.6.5.1
snmpget -v2c -c public <target> CISCO-VISM-MODULE-MIB::vismAal2VADTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.3.17.6.5.1 i <value>

Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-MODULE-MIB::vismAal2VADTimer OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.3cardSpecificBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.3.17vismConfigCISCO-VISM-MODULE-MIB
1.3.6.1.4.1.351.110.3.17.6vismAal2GrpCISCO-VISM-MODULE-MIB
1.3.6.1.4.1.351.110.3.17.6.5vismAal2VADTimerCISCO-VISM-MODULE-MIB