CISCO-VISM-DSX0-MIB :: ds0SidPacket

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VISM-DSX0-MIBds0SidPacket

ds0SidPacket

Module: CISCO-VISM-DSX0-MIB

OID (symbolic): CISCO-VISM-DSX0-MIB::ds0SidPacket

OID (numeric): 1.3.6.1.4.1.351.110.4.7.1.1.36

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether the Silence Indication Detection (SID) packet should be generated when silence suppression is in active mode. The SID packet indicates the noise level during silence, which is used as a reference to generate comfort noise on the other side of the gateway. This object is used for VoIP only.

What is ds0SidPacket?

This read-write TruthValue specifies whether a Silence Indication Detection (SID) packet is generated when silence suppression is active on this DS0, and it applies to VoIP only. The SID packet carries the ambient noise level so the far end can generate matching comfort noise, so enabling it improves perceived call quality during silent periods rather than leaving dead air. For instance, if users complain calls sound unnaturally silent during pauses, an admin would verify ds0SidPacket is enabled so comfort noise gets generated on the remote side.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.36
snmpwalk -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0SidPacket

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.36.1
snmpget -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0SidPacket.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.7.1.1.36.1 s <value>

Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX0-MIB::ds0SidPacket OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.4basisLinesBASIS-MIB
1.3.6.1.4.1.351.110.4.7dsx0VismBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.4.7.1dsx0VismCnfTableCISCO-VISM-DSX0-MIB
1.3.6.1.4.1.351.110.4.7.1.1dsx0VismCnfEntryCISCO-VISM-DSX0-MIB
1.3.6.1.4.1.351.110.4.7.1.1.36ds0SidPacketCISCO-VISM-DSX0-MIB