All MIBs › CISCO-VISM-DSX0-MIB › ds0InsertLocalCas
ds0InsertLocalCas
Module: CISCO-VISM-DSX0-MIB
OID (symbolic): CISCO-VISM-DSX0-MIB::ds0InsertLocalCas
OID (numeric): 1.3.6.1.4.1.351.110.4.7.1.1.12
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object tells the framer whether to force the cas bits to a value defined by ds0LocalCasPattern or not.
If this is enabled the framer will force the cas (ABCD) bits to a value defined in ds0LocalCasPattern by ignorning the cas bits sent by DSP. Else the framer will transmit the cas bits sent by DSP.
Setting of this object is not allowed when the signaling type of this line is cas.
Also setting of this object is not allowed when the ds0LoopbackCommand is set to RemoteLoop, because in this situation we are suppose to loopback whatever comes from the TDM side and not force the cas bits to something else.
This object can be set only if the line type is T1.
What is ds0InsertLocalCas?
This read-write TruthValue tells the framer whether to override the CAS (ABCD) bits with the fixed pattern in ds0LocalCasPattern instead of transmitting whatever bits the DSP sends. An admin would enable this when they need to force a specific signaling state on the line regardless of DSP activity, such as during testing or forced conditioning, and note that it cannot be set when the line's signaling type is CAS. For example, a technician forcing a channel into a fixed on-hook state for maintenance would enable ds0InsertLocalCas along with an appropriate ds0LocalCasPattern value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.12 snmpwalk -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0InsertLocalCas
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.12.1 snmpget -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0InsertLocalCas.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.7.1.1.12.1 s <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX0-MIB::ds0InsertLocalCas OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.7 | dsx0Vism | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.7.1 | dsx0VismCnfTable | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1 | dsx0VismCnfEntry | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1.12 | ds0InsertLocalCas | CISCO-VISM-DSX0-MIB |