All MIBs › CISCO-VISM-DSX0-MIB › ds0CasWinkMinMakeTime
ds0CasWinkMinMakeTime
Module: CISCO-VISM-DSX0-MIB
OID (symbolic): CISCO-VISM-DSX0-MIB::ds0CasWinkMinMakeTime
OID (numeric): 1.3.6.1.4.1.351.110.4.7.1.1.18
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The wink consists of off-hook A-B bit pattern, followed by on-hook A-B bit pattern in timed sequence. This object indicates the minimum duration for which the off-hook part of wink signal should persist.
This object cannot be configured if the signaling type for the line to which this ds0 belongs is non cas. For a cas line this object CAN only be configured only after associating this ds0 with an endpoint
This object will be applicable if ds0CasParameterSource has a value of mibValue (2). The allowed range for this object is 10..1000.
What is ds0CasWinkMinMakeTime?
This Integer32 (0..65535), in milliseconds, sets the minimum duration the off-hook portion of a wink signal must last on this DS0 to be recognized as a valid wink. Wink-start signaling is used to negotiate call setup with a PBX, so getting this minimum right prevents the gateway from ignoring a legitimate wink that's slightly shorter than expected or reacting to noise as a wink. For instance, if a connected PBX's winks are consistently just under the configured minimum, calls would fail to set up until an admin lowers ds0CasWinkMinMakeTime to match that PBX's actual timing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.18 snmpwalk -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasWinkMinMakeTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.18.1 snmpget -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasWinkMinMakeTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.7.1.1.18.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX0-MIB::ds0CasWinkMinMakeTime OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.7 | dsx0Vism | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.7.1 | dsx0VismCnfTable | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1 | dsx0VismCnfEntry | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1.18 | ds0CasWinkMinMakeTime | CISCO-VISM-DSX0-MIB |