All MIBs › CISCO-VISM-DSX0-MIB › ds0CasWinkMaxMakeTime
ds0CasWinkMaxMakeTime
Module: CISCO-VISM-DSX0-MIB
OID (symbolic): CISCO-VISM-DSX0-MIB::ds0CasWinkMaxMakeTime
OID (numeric): 1.3.6.1.4.1.351.110.4.7.1.1.19
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The wink consists of off-hook A-B bit pattern, followed by on-hook A-B bit pattern in timed sequence. This object indicates the maximum duration for which the off-hook part of the wink signal should persist, if it exceeds this time limit the signal will be considered to be spurious and will be ignored.
This object cannot be configured if the signaling type for the line to which this ds0 belongs is non cas. For a cas line this object CAN only be configured only after associating this ds0 with an endpoint
This object will be applicable if ds0CasParameterSource has a value of mibValue (2).
The allowed range for this object is 10..3000.
The value for this object should be greater than or equal to ds0CasWinkMinMakeTime
What is ds0CasWinkMaxMakeTime?
This Integer32 (0..65535), in milliseconds, sets the maximum duration the off-hook part of a wink signal may last before it's considered spurious and ignored. This upper bound protects the call-setup state machine from misinterpreting an extended off-hook condition (like a stuck line) as a valid wink. For example, an admin seeing failed call setups on a line with a flaky relay could check whether the off-hook pulses are exceeding ds0CasWinkMaxMakeTime and being discarded as spurious.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.19 snmpwalk -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasWinkMaxMakeTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.19.1 snmpget -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasWinkMaxMakeTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.7.1.1.19.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX0-MIB::ds0CasWinkMaxMakeTime OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.7 | dsx0Vism | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.7.1 | dsx0VismCnfTable | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1 | dsx0VismCnfEntry | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1.19 | ds0CasWinkMaxMakeTime | CISCO-VISM-DSX0-MIB |