All MIBs › CISCO-VISM-DSX0-MIB › ds0CasWinkBreakTime
ds0CasWinkBreakTime
Module: CISCO-VISM-DSX0-MIB
OID (symbolic): CISCO-VISM-DSX0-MIB::ds0CasWinkBreakTime
OID (numeric): 1.3.6.1.4.1.351.110.4.7.1.1.20
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The wink consists of off-hook A-B bit pattern, followed by on-hook A-B bit pattern in timed sequence. This object indicates the minimum duration for which the on-hook part of wink signal should persist.
This object cannot be configured if the signaling type for the line to which this ds0 belongs is non cas. For a cas line this object CAN only be configured only after associating this ds0 with an endpoint
This object will be applicable if ds0CasParameterSource has a value of mibValue (2). The allowed range for this object is 10..1000.
What is ds0CasWinkBreakTime?
This Integer32 (0..65535), in milliseconds, sets the minimum duration the on-hook portion of a wink signal must persist on this DS0 to be recognized. Together with the wink make-time objects, this defines the full timing window the gateway uses to validate wink-start signaling from the connected PBX. For instance, if wink-start call setups are being missed, an admin would review ds0CasWinkBreakTime alongside the make-time settings to ensure they match the PBX's actual signaling timing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.20 snmpwalk -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasWinkBreakTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.20.1 snmpget -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasWinkBreakTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.7.1.1.20.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX0-MIB::ds0CasWinkBreakTime OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.7 | dsx0Vism | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.7.1 | dsx0VismCnfTable | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1 | dsx0VismCnfEntry | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1.20 | ds0CasWinkBreakTime | CISCO-VISM-DSX0-MIB |