All MIBs › CISCO-VISM-DSX0-MIB › ds0CasOffHookMinMakeTime
ds0CasOffHookMinMakeTime
Module: CISCO-VISM-DSX0-MIB
OID (symbolic): CISCO-VISM-DSX0-MIB::ds0CasOffHookMinMakeTime
OID (numeric): 1.3.6.1.4.1.351.110.4.7.1.1.17
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This indicates the minimum time in msecs for which the off hook pattern should be present in order for it to be recognised else the signal will be considered to be a spurious signal and will be ignored.
This object cannot be configured if the signaling type for the line to which this ds0 belongs is non cas.
For a cas line this object CAN only be configured only after associating this ds0 with an endpoint This object will be applicable if ds0CasParameterSource has a value of mibValue (2). The allowed range for this object is 10..1000
What is ds0CasOffHookMinMakeTime?
This Integer32 (0..65535), in milliseconds, sets the minimum duration the off-hook signaling pattern must persist on this DS0 before it's treated as a real signal rather than noise. This protects call setup logic from reacting to brief electrical glitches as if a caller had actually gone off-hook, and like its on-hook counterpart it only applies to CAS-signaled endpoints. For example, an admin troubleshooting spurious call-setup attempts on a CAS trunk might increase ds0CasOffHookMinMakeTime to filter out transient line disturbances.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.17 snmpwalk -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasOffHookMinMakeTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.17.1 snmpget -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasOffHookMinMakeTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.7.1.1.17.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX0-MIB::ds0CasOffHookMinMakeTime OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.7 | dsx0Vism | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.7.1 | dsx0VismCnfTable | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1 | dsx0VismCnfEntry | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1.17 | ds0CasOffHookMinMakeTime | CISCO-VISM-DSX0-MIB |