All MIBs › CISCO-VISM-DSX0-MIB › ds0CasCadenceOffTime
ds0CasCadenceOffTime
Module: CISCO-VISM-DSX0-MIB
OID (symbolic): CISCO-VISM-DSX0-MIB::ds0CasCadenceOffTime
OID (numeric): 1.3.6.1.4.1.351.110.4.7.1.1.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This attribute corresponds to the silence between the digit tones. This object is applicable only for CAS backhaul applications. For trunking application it is not applicable. The value is expresssed in units of milliseconds.
From vism2.0.3 release onwards this object can configured in any application, but will be applicable only in non-trunking applications and will be ignored in other applications.
What is ds0CasCadenceOffTime?
This Integer32 (0..9999), in milliseconds, sets the silence duration between digit tones on this DS0, applicable to CAS backhaul (and non-trunking) applications. Together with ds0CasCadenceOnTime, this defines the full tone cadence a PBX expects, so misconfiguring it can cause dialed digits to be missed or misread. For instance, an admin integrating with an older PBX that expects longer gaps between digits would increase ds0CasCadenceOffTime to match that equipment's timing requirements.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.11 snmpwalk -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasCadenceOffTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.7.1.1.11.1 snmpget -v2c -c public <target> CISCO-VISM-DSX0-MIB::ds0CasCadenceOffTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.7.1.1.11.1 i <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-DSX0-MIB::ds0CasCadenceOffTime OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.7 | dsx0Vism | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.7.1 | dsx0VismCnfTable | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1 | dsx0VismCnfEntry | CISCO-VISM-DSX0-MIB |
| 1.3.6.1.4.1.351.110.4.7.1.1.11 | ds0CasCadenceOffTime | CISCO-VISM-DSX0-MIB |