All MIBs › CISCO-VISM-CONN-MIB › vismFarEndE164Address
vismFarEndE164Address
Module: CISCO-VISM-CONN-MIB
OID (symbolic): CISCO-VISM-CONN-MIB::vismFarEndE164Address
OID (numeric): 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The E.164 address of the far end peer. The address is expressed as decimal numbers with up to 15 digits. If the vismFarEndAddressType is different from e164, this object is not applicable and it should be ignored.
This object serves as the scope for VCCI identifiers (vismVCCI), if vismFarEndAddressType is equal to e164. In that case, the combination of (vismFarEndE164Address, vismVCCI) will always be unique for any given agent. It thus constitutes a label denoting the scope for a VCCI address space; it has no purpose otherwise.
While this object is writeable, it is recommended not to change the value of this object once it has been created. However, upon modification, it will be ensured that the resulting combination of VCCI and remote E164 address is unique (as long as the remote address type is E164). Requests that would result in a non-unique combination will be rejected. Beyond this, there are no other integrity constraints that will be enforced for this object. This includes network-level consistency with the actual address of the remote peer.
The value of this object cannot be modified when there are active calls on this PVC. The valid characters allowed are '0..9'.
What is vismFarEndE164Address?
This read-write DisplayString object (1-15 digits) holds the far end peer's E.164 address as decimal digits, applicable only when vismFarEndAddressType is e164, and it scopes VCCI uniqueness so the combination of this address and vismVCCI is always unique for a given agent. This field is only meaningful, and only validated, when the address type is specifically set to e164; otherwise it should be ignored entirely. An engineer configuring a connection identified by telephone number would populate this field with the far end's E.164 number and ensure vismFarEndAddressType is correctly set to e164.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42 snmpwalk -v2c -c public <target> CISCO-VISM-CONN-MIB::vismFarEndE164Address
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42.1 snmpget -v2c -c public <target> CISCO-VISM-CONN-MIB::vismFarEndE164Address.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42.1 s <value>
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-CONN-MIB::vismFarEndE164Address OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5 | voice | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3 | vismChanGrp | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1 | vismChanCnfGrp | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.3.1.1 | vismChanCnfGrpTable | CISCO-VISM-CONN-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1 | vismChanCnfGrpEntry | CISCO-VISM-CONN-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.1.1.1.42 | vismFarEndE164Address | CISCO-VISM-CONN-MIB |