All MIBs › CISCO-VISM-CONN-MIB › vismChanRcvATMState
vismChanRcvATMState
Module: CISCO-VISM-CONN-MIB
OID (symbolic): CISCO-VISM-CONN-MIB::vismChanRcvATMState
OID (numeric): 1.3.6.1.4.1.351.110.5.5.3.2.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the receive state of channel on the ATM side(from the network).
'other (1)' : Indicates the receive channel is in unknown state. 'normal (2)' : Indicates the receive channel is in a normal state. 'receivingAIS (3)' : Indicates the receive channel is receiving AIS alarm cells from the network side. 'receivingFERF (4)' : Indicates the receive channel is receiving Far End Receive Failure alarm cells from the network side. 'oamFailure (5)' : Indicates that the receive channel has failed OAM end-to-end loopback.
What is vismChanRcvATMState?
This read-only INTEGER object indicates the receive state of a channel on the ATM side: other, normal, receivingAIS (receiving AIS alarm cells from the network), receivingFERF, or oamFailure. This tells an admin what alarm condition, if any, is currently arriving from the network side into this channel, complementing the transmit-side state object. An engineer seeing a channel report receivingAIS would recognize the network is signaling a defect upstream of this channel rather than the fault being local.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.2.1.1.4 snmpwalk -v2c -c public <target> CISCO-VISM-CONN-MIB::vismChanRcvATMState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.2.1.1.4.1 snmpget -v2c -c public <target> CISCO-VISM-CONN-MIB::vismChanRcvATMState.1
Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-CONN-MIB::vismChanRcvATMState OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5 | basisServices | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5 | voice | BASIS-MIB |
| 1.3.6.1.4.1.351.110.5.5.3 | vismChanGrp | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.3.2 | vismChanStateGrp | CISCO-VISM-CONN-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.2.1 | vismChanStateGrpTable | CISCO-VISM-CONN-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.2.1.1 | vismChanStateGrpEntry | CISCO-VISM-CONN-MIB |
| 1.3.6.1.4.1.351.110.5.5.3.2.1.1.4 | vismChanRcvATMState | CISCO-VISM-CONN-MIB |