CISCO-VISM-CONN-MIB :: vismChanFallbackLcn

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-VISM-CONN-MIBvismChanFallbackLcn

vismChanFallbackLcn

Module: CISCO-VISM-CONN-MIB

OID (symbolic): CISCO-VISM-CONN-MIB::vismChanFallbackLcn

OID (numeric): 1.3.6.1.4.1.351.110.5.5.3.1.1.1.39

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object defines the LCN to be used as a fallback mechanism, in case the primary PVC fails. This is applicable if the PVC is configured for redundancy. The redundancy is applicable for both applications i.e control PVC and bearer PVC.

This object is applicable only if the vismChanProtection is set to 'protected'. It is mandatory if the PVC is protected.

What is vismChanFallbackLcn?

This read-write Integer32 object (131-510) defines the LCN to use as a fallback if the primary PVC fails, applicable when the PVC is configured for redundancy across both control and bearer applications; it's only applicable, and mandatory, when vismChanProtection is set to protected. This object provides the specific fallback target when a protected PVC's primary path fails, and it's a required field once protection is enabled rather than optional. An engineer setting up a protected control PVC would be required to also configure this fallback LCN pointing to the designated secondary PVC.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.39
snmpwalk -v2c -c public <target> CISCO-VISM-CONN-MIB::vismChanFallbackLcn

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.39.1
snmpget -v2c -c public <target> CISCO-VISM-CONN-MIB::vismChanFallbackLcn.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.5.5.3.1.1.1.39.1 i <value>

Start monitoring Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VISM-CONN-MIB::vismChanFallbackLcn OID value, configure state conditions and alerts, and monitor any Cisco VISM (Voice Interworking Service Module) card, MGX platform (legacy) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.110basisBASIS-MIB
1.3.6.1.4.1.351.110.5basisServicesBASIS-MIB
1.3.6.1.4.1.351.110.5.5voiceBASIS-MIB
1.3.6.1.4.1.351.110.5.5.3vismChanGrpBASIS-MIB
1.3.6.1.4.1.351.110.5.5.3.1vismChanCnfGrpBASIS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.351.110.5.5.3.1.1vismChanCnfGrpTableCISCO-VISM-CONN-MIB
1.3.6.1.4.1.351.110.5.5.3.1.1.1vismChanCnfGrpEntryCISCO-VISM-CONN-MIB
1.3.6.1.4.1.351.110.5.5.3.1.1.1.39vismChanFallbackLcnCISCO-VISM-CONN-MIB