CISCO-SME-MIB :: cSmeNotifyEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-SME-MIB › cSmeNotifyEnable

cSmeNotifyEnable

Module: CISCO-SME-MIB

OID (symbolic): CISCO-SME-MIB::cSmeNotifyEnable

OID (numeric): 1.3.6.1.4.1.9.9.632.1.1.8

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies if the SME notifications should be generated or not.

If the value of this object is 'true', then the notifications are generated.

If the value of this object is 'false, then the notifications are not generated.

What is cSmeNotifyEnable?

This object enables or disables generation of SME SNMP notifications. Turning this off silences all SME-related traps from this device, which might be done deliberately to reduce trap volume from a well-understood, low-priority subsystem, but it also means any real SME fault, such as an interface going down or a cluster master changing, would go unreported to the NMS until someone happens to poll the relevant tables directly. Disabling this during a planned cluster reconfiguration prevents transient state-change traps from paging on-call staff, but it must be re-enabled afterward to keep catching genuine encryption faults.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.632.1.1.8
snmpwalk -v2c -c public <target> CISCO-SME-MIB::cSmeNotifyEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.632.1.1.8.1
snmpget -v2c -c public <target> CISCO-SME-MIB::cSmeNotifyEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.632.1.1.8.1 s <value>

Start monitoring Cisco MDS SAN switches (Storage Media Encryption) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SME-MIB::cSmeNotifyEnable OID value, configure state conditions and alerts, and monitor any Cisco MDS SAN switches (Storage Media Encryption) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.632ciscoSmeMIBCISCO-SME-MIB
1.3.6.1.4.1.9.9.632.1ciscoSmeMIBObjectsCISCO-SME-MIB
1.3.6.1.4.1.9.9.632.1.1cSmeConfigCISCO-SME-MIB
1.3.6.1.4.1.9.9.632.1.1.8cSmeNotifyEnableCISCO-SME-MIB