-- MIB file created 31-Mar-2008 22:21:23, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

CISCO-SME-MIB DEFINITIONS ::= BEGIN

-- From file: "CISCO-SME-MIB.my"
-- Compile options "4 7 F H N O W 03 06 0B 0G 0N 0T"

IMPORTS
    TruthValue, TimeStamp, RowStatus, StorageType
            FROM SNMPv2-TC-v1
    InterfaceIndex, ifDescr
            FROM IF-MIB
    SnmpAdminString
            FROM SNMP-FRAMEWORK-MIB
    InetAddressType, InetAddress
            FROM INET-ADDRESS-MIB
    FcNameId
            FROM CISCO-ST-TC
    ciscoMgmt
            FROM CISCO-SMI
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215;

ciscoSmeMIB OBJECT IDENTIFIER ::= { ciscoMgmt 632 }
-- MODULE-IDENTITY
--  LastUpdated
--    200803280000Z
--  OrgName
--    Cisco Systems Inc. 
--  ContactInfo
--         Cisco Systems
--          Customer Service
--    Postal: 170 W Tasman Drive
--          San Jose, CA  95134
--          USA
--    Tel: +1 800 553 -NETS
--    E-mail: cs-san@cisco.com
--  Descr
--    MIB module to manage Storage Media Encryption (SME) service.
--    SME is an encryption service provided by an encryption node
--    residing on a linecard in a storage device. It receives 
--    clear-text data from host, encrypts it, then sends it to be
--    written to tape or disk. It does the reverse in the opposite 
--    direction so the service is completely transparent to the 
--    host. The purpose of this service is to enhance data security
--    in case the tape or disk is lost or stolen.
--    
--    As with any important service, user requires that it provides
--    some level of fault tolerant in a graceful manner.
--    SME provides this by allowing encryption nodes to be grouped 
--    into cluster. Nodes in the same cluster immediately pick up 
--    the work of a failed node so user does not see service 
--    disruption.
--  RevDate
--    200803280000Z
--  RevDescr
--    Initial version

ciscoSmeMIBNotifs OBJECT IDENTIFIER ::= { ciscoSmeMIB 0 }
ciscoSmeMIBObjects OBJECT IDENTIFIER ::= { ciscoSmeMIB 1 }
ciscoSmeMIBConform OBJECT IDENTIFIER ::= { ciscoSmeMIB 2 }
cSmeConfig      OBJECT IDENTIFIER ::= { ciscoSmeMIBObjects 1 }
ciscoSmeMIBCompliances OBJECT IDENTIFIER ::= { ciscoSmeMIBConform 1 }
ciscoSmeMIBGroups OBJECT IDENTIFIER ::= { ciscoSmeMIBConform 2 }

CiscoSmeInterfaceStatus ::= INTEGER {
        unknown(1),
        initializing(2),
        offline(3),
        online(4)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Operational state of the SME interface.
--    'unknown(1)' == interface is in an unknown state
--    'initializing(2)' == interface is being initialized
--    'offline(3)' == interface is not active
--    'online(4)' == interface is online and can be used

CiscoSmeClusterStatus ::= INTEGER {
        unknown(1),
        inactive(2),
        degraded(3),
        recovery(4),
        active(5)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Operational state of the SME cluster
--    'unknown(1)' == cluster is in an unknown state
--    'inactive(2)' == cluster is not active
--    'degraded(3)' == cluster has lost some of its members
--    'recovery(4)' == cluster is recovering from membership lost
--    'active(5)'   == cluster is active

CiscoSmeClusterIndex ::= OCTET STRING(SIZE(32))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This denotes the globally unique index for a SME
--    cluster. The value of the CiscoSmeClusterIndex is
--    a thirty-two-octet unsigned integer value encoded in
--    a network-byte order.

cSmeClusterTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CSmeClusterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table lists all the SME clusters that are configured
              on this device. As with any important service, user requires
              that it provides some level of fault tolerant in a graceful
              manner. SME provides this by allowing encryption nodes to be
              grouped into cluster. Nodes in the same cluster immediately 
              pick up the work of a failed node so user does not see 
              service disruption."
    ::= { cSmeConfig 1 }

cSmeClusterEntry OBJECT-TYPE
    SYNTAX CSmeClusterEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A conceptual row in the cSmeClusterTable. Each
        row represents a SME cluster in the system and 
        provides the runtime and configuration information
        of a cluster."
    INDEX { cSmeClusterId }
    ::= { cSmeClusterTable 1 }

CSmeClusterEntry ::= SEQUENCE {
    cSmeClusterId CiscoSmeClusterIndex,
    cSmeClusterName SnmpAdminString,
    cSmeClusterState CiscoSmeClusterStatus,
    cSmeClusterMasterInetAddrType InetAddressType,
    cSmeClusterMasterInetAddr InetAddress,
    cSmeClusterStorageType StorageType,
    cSmeClusterRowStatus RowStatus
    }

cSmeClusterId OBJECT-TYPE
    SYNTAX CiscoSmeClusterIndex
--    Rsyntax OCTET STRING(SIZE(32))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Globally unique index that identifies a SME cluster.
        This index must be generated in such a way that the 
        same value is never reused even after cluster has been 
        deleted."
    ::= { cSmeClusterEntry 1 }

cSmeClusterName OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(0..32))
--    Rsyntax OCTET STRING(SIZE(0..32))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The name of the SME cluster."
    DEFVAL { "" }
    ::= { cSmeClusterEntry 2 }

cSmeClusterState OBJECT-TYPE
    SYNTAX CiscoSmeClusterStatus
--    Rsyntax INTEGER {
--        unknown(1),
--        inactive(2),
--        degraded(3),
--        recovery(4),
--        active(5)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The operational state of the SME cluster."
    ::= { cSmeClusterEntry 3 }

cSmeClusterMasterInetAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The type of Internet address of the SME cluster
        master.  The Internet address of SME cluster master is
        specified by the value of the corresponding instance
        of cSmeClusterMasterInetAddr."
    ::= { cSmeClusterEntry 4 }

cSmeClusterMasterInetAddr OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The Internet address of the SME cluster master
        device. The type of this Internet address is
        determined by the value of the corresponding
        instance of cSmeClusterMasterInetAddrType."
    ::= { cSmeClusterEntry 5 }

cSmeClusterStorageType OBJECT-TYPE
    SYNTAX StorageType
--    Rsyntax INTEGER {
--        other(1),
--        volatile(2),
--        nonVolatile(3),
--        permanent(4),
--        readOnly(5)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the storage type for this conceptual
        row."
    ::= { cSmeClusterEntry 6 }

cSmeClusterRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this conceptual row.
        
        There is no restriction on the value of other columns
        before a newly created row can be made active."
    ::= { cSmeClusterEntry 7 }

cSmeClusterMembersTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CSmeClusterMembersEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table lists the information of devices, local or
        remote, which are members of SME clusters configured on a
        device."
    ::= { cSmeConfig 2 }

cSmeClusterMembersEntry OBJECT-TYPE
    SYNTAX CSmeClusterMembersEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A conceptual row in the cSmeClusterMembersTable.
        Each row represents a member device within a 
        specified SME Cluster."
    INDEX { cSmeClusterId, cSmeMemberInetAddrType, cSmeMemberInetAddr }
    ::= { cSmeClusterMembersTable 1 }

CSmeClusterMembersEntry ::= SEQUENCE {
    cSmeMemberInetAddrType InetAddressType,
    cSmeMemberInetAddr InetAddress,
    cSmeFabric SnmpAdminString,
    cSmeIsMemberLocal TruthValue,
    cSmeMemberIsMaster TruthValue,
    cSmeClusterMemberStorageType StorageType,
    cSmeClusterMemberRowStatus RowStatus
    }

cSmeMemberInetAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The type of Internet address of a cluster member within
        a specified SME cluster. The Internet address of this
        device is specified by the value of the corresponding
        instance of cSmeMemberInetAddr."
    ::= { cSmeClusterMembersEntry 1 }

cSmeMemberInetAddr OBJECT-TYPE
    SYNTAX InetAddress(SIZE(0..32))
--    Rsyntax OCTET STRING(SIZE(0..32))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The Internet address of the cluster member device
        within a specified SME cluster.
        The type of this Internet address is determined
        by the value of the corresponding instance of 
        cSmeMemberInetAddrType."
    ::= { cSmeClusterMembersEntry 2 }

cSmeFabric OBJECT-TYPE
    SYNTAX SnmpAdminString(SIZE(1..32))
--    Rsyntax OCTET STRING(SIZE(1..32))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Refers to the name of physical fibre channel fabric in the
        SAN. A typical SAN deployment consists of a dual fabric 
        topology which corresponds to two physical fabrics. 
        In such a deployment, a VSAN and a cluster is configured 
        in both fabrics to allow multi-pathing and redundancy.
                
        The user specifies the physical fabric to which a device 
        belongs to when the cluster is configured."
    ::= { cSmeClusterMembersEntry 3 }

cSmeIsMemberLocal OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Identifies if the device is a local or remote member of
        this cluster.
        'true' means this device is a local device.
        'false' means this device is a remote device."
    ::= { cSmeClusterMembersEntry 4 }

cSmeMemberIsMaster OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates if this device is currently the master of
        the SME cluster.
        
        The value 'true' means this device is the master.
        The value 'false' means this device is not the master.
        
        Devices in a cluster select one of the cluster member 
        to be a master.  The master is responsible for 
        handling cluster membership."
    ::= { cSmeClusterMembersEntry 5 }

cSmeClusterMemberStorageType OBJECT-TYPE
    SYNTAX StorageType
--    Rsyntax INTEGER {
--        other(1),
--        volatile(2),
--        nonVolatile(3),
--        permanent(4),
--        readOnly(5)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the storage type for this conceptual
        row."
    ::= { cSmeClusterMembersEntry 6 }

cSmeClusterMemberRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this conceptual row.
        
        There is no restriction on the value of other columns
        before a newly created row can be made active.
        
        When a cluster is deleted, all entries in this table
        should be purged automatically."
    ::= { cSmeClusterMembersEntry 7 }

cSmeClusterMemberIfTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CSmeClusterMemberIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table lists the information of SME interfaces on all
        devices, local or remote, which are members of SME clusters
        configured on a device."
    ::= { cSmeConfig 3 }

cSmeClusterMemberIfEntry OBJECT-TYPE
    SYNTAX CSmeClusterMemberIfEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A conceptual row in the cSmeClusterMemberIfTable.
        Each row represents a participating interface on 
        local/remote device member within the specified 
        SME cluster."
    INDEX { cSmeClusterId, cSmeMemberInetAddrType, cSmeMemberInetAddr, cSmeClusterInterfaceIndex }
    ::= { cSmeClusterMemberIfTable 1 }

CSmeClusterMemberIfEntry ::= SEQUENCE {
    cSmeClusterInterfaceIndex InterfaceIndex,
    cSmeClusterInterfaceState CiscoSmeInterfaceStatus
    }

cSmeClusterInterfaceIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
--    Rsyntax INTEGER(1..2147483647)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A unique Interface index for a SME interface on a device
        in this cluster.  This is the same as ifIndex of the 
        ifTable of RFC1213."
    ::= { cSmeClusterMemberIfEntry 1 }

cSmeClusterInterfaceState OBJECT-TYPE
    SYNTAX CiscoSmeInterfaceStatus
--    Rsyntax INTEGER {
--        unknown(1),
--        initializing(2),
--        offline(3),
--        online(4)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The operational state of this SME interface."
    ::= { cSmeClusterMemberIfEntry 2 }

cSmeInterfaceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CSmeInterfaceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table lists all SME interfaces on the local device and
        its corresponding information."
    ::= { cSmeConfig 4 }

cSmeInterfaceEntry OBJECT-TYPE
    SYNTAX CSmeInterfaceEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A conceptual row in the cSmeInterfaceTable.
        Each row represents a particular SME interface on 
        a local device."
    INDEX { cSmeInterfaceIndex }
    ::= { cSmeInterfaceTable 1 }

CSmeInterfaceEntry ::= SEQUENCE {
    cSmeInterfaceIndex InterfaceIndex,
    cSmeInterfaceState CiscoSmeInterfaceStatus,
    cSmeInterfaceClusterId CiscoSmeClusterIndex,
    cSmeInterfaceStorageType StorageType,
    cSmeInterfaceRowStatus RowStatus
    }

cSmeInterfaceIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
--    Rsyntax INTEGER(1..2147483647)
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A unique Interface index for a SME interface on this device.
        This is the same as ifIndex of the ifTable of RFC1213."
    ::= { cSmeInterfaceEntry 1 }

cSmeInterfaceState OBJECT-TYPE
    SYNTAX CiscoSmeInterfaceStatus
--    Rsyntax INTEGER {
--        unknown(1),
--        initializing(2),
--        offline(3),
--        online(4)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Operational state of this SME interface."
    ::= { cSmeInterfaceEntry 2 }

cSmeInterfaceClusterId OBJECT-TYPE
    SYNTAX CiscoSmeClusterIndex
--    Rsyntax OCTET STRING(SIZE(32))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Identifies the cluster to which this SME interface belongs."
    ::= { cSmeInterfaceEntry 3 }

cSmeInterfaceStorageType OBJECT-TYPE
    SYNTAX StorageType
--    Rsyntax INTEGER {
--        other(1),
--        volatile(2),
--        nonVolatile(3),
--        permanent(4),
--        readOnly(5)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the storage type for this conceptual
        row."
    ::= { cSmeInterfaceEntry 4 }

cSmeInterfaceRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this conceptual row.
        
        There is no restriction on the value of other columns
        before a newly created row can be made active.
        For example, cSmeInterfaceClusterId column can be set
        independently later."
    ::= { cSmeInterfaceEntry 5 }

cSmeHostPortTable OBJECT-TYPE
    SYNTAX SEQUENCE OF CSmeHostPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table lists the hosts that are configured for
        SME. In the case of application servers, the disks
        that are accessed by the hosts may be encrypted. In the
        case of backup/restore master/media servers, the tapes 
        accessed by the hosts may be encrypted."
    ::= { cSmeConfig 5 }

cSmeHostPortEntry OBJECT-TYPE
    SYNTAX CSmeHostPortEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "A conceptual row in the cSmeHostPortTable.
        Each row represents a particular host configured for
        SME service in a particular cluster."
    INDEX { cSmeHostPortName }
    ::= { cSmeHostPortTable 1 }

CSmeHostPortEntry ::= SEQUENCE {
    cSmeHostPortName FcNameId,
    cSmeHostPortClusterId CiscoSmeClusterIndex,
    cSmeHostPortStorageType StorageType,
    cSmeHostPortRowStatus RowStatus
    }

cSmeHostPortName OBJECT-TYPE
    SYNTAX FcNameId
--    Rsyntax OCTET STRING(SIZE(8))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Fibre-channel Port name (P_WWN) of the Host Nx_Port."
    ::= { cSmeHostPortEntry 1 }

cSmeHostPortClusterId OBJECT-TYPE
    SYNTAX CiscoSmeClusterIndex
--    Rsyntax OCTET STRING(SIZE(32))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Identifies the cluster to which this host port belongs."
    ::= { cSmeHostPortEntry 2 }

cSmeHostPortStorageType OBJECT-TYPE
    SYNTAX StorageType
--    Rsyntax INTEGER {
--        other(1),
--        volatile(2),
--        nonVolatile(3),
--        permanent(4),
--        readOnly(5)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies the storage type for this conceptual
        row."
    ::= { cSmeHostPortEntry 3 }

cSmeHostPortRowStatus OBJECT-TYPE
    SYNTAX RowStatus
--    Rsyntax INTEGER {
--        active(1),
--        notInService(2),
--        notReady(3),
--        createAndGo(4),
--        createAndWait(5),
--        destroy(6)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this conceptual row.
        
        There is no restriction on the value of other columns
        before a newly created row can be made active."
    ::= { cSmeHostPortEntry 4 }

cSmeConfigTableLastChanged OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of sysUpTime when a change to any SME MIB
        table other than the cSmeHostPortTable last occurred."
    ::= { cSmeConfig 6 }

cSmeHostPortTableLastChanged OBJECT-TYPE
    SYNTAX TimeStamp
--    Rsyntax TimeTicks
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value of sysUpTime when a change to cSmeHostPortTable
        last occurred."
    ::= { cSmeConfig 7 }

cSmeNotifyEnable OBJECT-TYPE
    SYNTAX TruthValue
--    Rsyntax INTEGER {
--        true(1),
--        false(2)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object specifies if the SME notifications
        should be generated or not.
        
        If the value of this object is 'true', then
        the notifications are generated.
        
        If the value of this object is 'false, then
        the notifications are not generated."
    DEFVAL { true }
    ::= { cSmeConfig 8 }

ciscoSmeInterfaceCreate TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoSmeMIB
    VARIABLES {
        ifDescr }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated when a SME interface
        associated with a local device is created."
    ::= 1

ciscoSmeInterfaceDelete TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoSmeMIB
    VARIABLES {
        ifDescr }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated when a SME interface
        associated with a local device is deleted."
    ::= 2

ciscoSmeClusterNewMaster TRAP-TYPE
-- Reverse mappable trap
    ENTERPRISE ciscoSmeMIB
    VARIABLES {
        cSmeClusterName, cSmeClusterMasterInetAddrType, 
        cSmeClusterMasterInetAddr }
--  Status
--    mandatory
    DESCRIPTION
        "This notification is generated when the sending device
        who is participating in a SME cluster has transitioned 
        to be the master of the cluster."
    ::= 3

ciscoSmeConfigGroup OBJECT IDENTIFIER ::= { ciscoSmeMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for SME configuration.
--  objects
--    cSmeClusterState, cSmeClusterMasterInetAddrType, 
--    cSmeClusterMasterInetAddr, cSmeIsMemberLocal, 
--    cSmeClusterInterfaceState, cSmeInterfaceState, 
--    cSmeInterfaceClusterId, cSmeHostPortClusterId, 
--    cSmeConfigTableLastChanged, cSmeHostPortTableLastChanged, 
--    cSmeFabric, cSmeClusterName, cSmeInterfaceRowStatus, 
--    cSmeClusterRowStatus, cSmeMemberIsMaster, 
--    cSmeClusterMemberRowStatus, cSmeClusterStorageType, 
--    cSmeClusterMemberStorageType, cSmeInterfaceStorageType, 
--    cSmeHostPortStorageType, cSmeHostPortRowStatus

ciscoSmeNotifControlGroup OBJECT IDENTIFIER ::= { ciscoSmeMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for controlling SME notification.
--  objects
--    cSmeNotifyEnable

ciscoSmeNotifsGroup OBJECT IDENTIFIER ::= { ciscoSmeMIBGroups 3 }
-- NOTIFICATION-GROUP
--  Status
--    mandatory
--  Descr
--    A collection of objects for notification of SME events.
--  notifications
--    ciscoSmeInterfaceCreate, ciscoSmeInterfaceDelete, 
--    ciscoSmeClusterNewMaster

ciscoSmeMIBCompliance OBJECT IDENTIFIER ::= { ciscoSmeMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The compliance statement for entities that implement
--    SME.
--  Module
--    >>current<<
--   MandGroup
--    ciscoSmeConfigGroup
--   MandGroup
--    ciscoSmeNotifControlGroup
--   MandGroup
--    ciscoSmeNotifsGroup


END