All MIBs › CISCO-SME-MIB › cSmeFabric
cSmeFabric
Module: CISCO-SME-MIB
OID (symbolic): CISCO-SME-MIB::cSmeFabric
OID (numeric): 1.3.6.1.4.1.9.9.632.1.1.2.1.3
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-write
Description: Refers to the name of physical fibre channel fabric in the SAN. A typical SAN deployment consists of a dual fabric topology which corresponds to two physical fabrics. In such a deployment, a VSAN and a cluster is configured in both fabrics to allow multi-pathing and redundancy.
The user specifies the physical fabric to which a device belongs to when the cluster is configured.
What is cSmeFabric?
This object is the name of the physical Fibre Channel fabric this cluster belongs to, relevant because a typical dual-fabric SAN has a separate cluster configured in each physical fabric for multipathing and redundancy. This tells the admin which of potentially two or more physical fabrics a given cluster instance actually operates in, important when troubleshooting because a fault in one fabric should not affect the cluster instance running in the other. A cluster named SME-East tied to fabric Fabric-A while a same-named cluster instance runs in Fabric-B confirms the dual-fabric redundant design is correctly mirrored on both sides.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.632.1.1.2.1.3 snmpwalk -v2c -c public <target> CISCO-SME-MIB::cSmeFabric
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.632.1.1.2.1.3.1 snmpget -v2c -c public <target> CISCO-SME-MIB::cSmeFabric.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.632.1.1.2.1.3.1 s <value>
Start monitoring Cisco MDS SAN switches (Storage Media Encryption) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SME-MIB::cSmeFabric OID value, configure state conditions and alerts, and monitor any Cisco MDS SAN switches (Storage Media Encryption) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.632 | ciscoSmeMIB | CISCO-SME-MIB |
| 1.3.6.1.4.1.9.9.632.1 | ciscoSmeMIBObjects | CISCO-SME-MIB |
| 1.3.6.1.4.1.9.9.632.1.1 | cSmeConfig | CISCO-SME-MIB |
| 1.3.6.1.4.1.9.9.632.1.1.2 | cSmeClusterMembersTable | CISCO-SME-MIB |
| 1.3.6.1.4.1.9.9.632.1.1.2.1 | cSmeClusterMembersEntry | CISCO-SME-MIB |
| 1.3.6.1.4.1.9.9.632.1.1.2.1.3 | cSmeFabric | CISCO-SME-MIB |