All MIBs › CISCO-LWAPP-RRM-MIB › clrRrmParametersDataPktPercentThreshold
clrRrmParametersDataPktPercentThreshold
Module: CISCO-LWAPP-RRM-MIB
OID (symbolic): CISCO-LWAPP-RRM-MIB::clrRrmParametersDataPktPercentThreshold
OID (numeric): 1.3.6.1.4.1.9.9.615.1.1.1.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the threshold on the percent of Data packets dropped, that is required to trigger the CHD algorithm on the controller.
What is clrRrmParametersDataPktPercentThreshold?
Sets the percentage of dropped data packets required to trigger the Coverage Hole Detection algorithm on the controller.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.615.1.1.1.1.8 snmpwalk -v2c -c public <target> CISCO-LWAPP-RRM-MIB::clrRrmParametersDataPktPercentThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.615.1.1.1.1.8.1 snmpget -v2c -c public <target> CISCO-LWAPP-RRM-MIB::clrRrmParametersDataPktPercentThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.615.1.1.1.1.8.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-RRM-MIB::clrRrmParametersDataPktPercentThreshold OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.615 | ciscoLwappRrmMIB | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1 | ciscoLwappRrmMIBObjects | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1.1 | clrRrmConfig | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1.1.1 | clrRrmParametersTable | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1.1.1.1 | clrRrmParametersEntry | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1.1.1.1.8 | clrRrmParametersDataPktPercentThreshold | CISCO-LWAPP-RRM-MIB |