All MIBs › CISCO-LWAPP-RRM-MIB › clrRrmParametersDataPktCountThreshold
clrRrmParametersDataPktCountThreshold
Module: CISCO-LWAPP-RRM-MIB
OID (symbolic): CISCO-LWAPP-RRM-MIB::clrRrmParametersDataPktCountThreshold
OID (numeric): 1.3.6.1.4.1.9.9.615.1.1.1.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the minimum threshold on the Data packet count required to trigger the CHD algorithm on the controller.
What is clrRrmParametersDataPktCountThreshold?
Sets the minimum data packet count that must be observed before the Coverage Hole Detection algorithm is triggered on the controller.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.615.1.1.1.1.7 snmpwalk -v2c -c public <target> CISCO-LWAPP-RRM-MIB::clrRrmParametersDataPktCountThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.615.1.1.1.1.7.1 snmpget -v2c -c public <target> CISCO-LWAPP-RRM-MIB::clrRrmParametersDataPktCountThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.615.1.1.1.1.7.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-RRM-MIB::clrRrmParametersDataPktCountThreshold OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.615 | ciscoLwappRrmMIB | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1 | ciscoLwappRrmMIBObjects | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1.1 | clrRrmConfig | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1.1.1 | clrRrmParametersTable | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1.1.1.1 | clrRrmParametersEntry | CISCO-LWAPP-RRM-MIB |
| 1.3.6.1.4.1.9.9.615.1.1.1.1.7 | clrRrmParametersDataPktCountThreshold | CISCO-LWAPP-RRM-MIB |