CISCO-ITP-DSMR-MIB :: cdsmrInstDestSignalErrors

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ITP-DSMR-MIBcdsmrInstDestSignalErrors

cdsmrInstDestSignalErrors

Module: CISCO-ITP-DSMR-MIB

OID (symbolic): CISCO-ITP-DSMR-MIB::cdsmrInstDestSignalErrors

OID (numeric): 1.3.6.1.4.1.9.9.1300.1.2.1.19

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: Count of the number of times packet was not routed because destination had signal error.

What is cdsmrInstDestSignalErrors?

This read-only counter tracks how many packets could not be routed because the destination reported a signal error.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.1300.1.2.1.19
snmpwalk -v2c -c public <target> CISCO-ITP-DSMR-MIB::cdsmrInstDestSignalErrors

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.1300.1.2.1.19.1
snmpget -v2c -c public <target> CISCO-ITP-DSMR-MIB::cdsmrInstDestSignalErrors.1

Start monitoring Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ITP-DSMR-MIB::cdsmrInstDestSignalErrors OID value, configure state conditions and alerts, and monitor any Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.1300ciscoItpDsmrMIBCISCO-ITP-DSMR-MIB
1.3.6.1.4.1.9.9.1300.1ciscoItpDsmrMIBObjectsCISCO-ITP-DSMR-MIB
1.3.6.1.4.1.9.9.1300.1.2cdsmrInstTableCISCO-ITP-DSMR-MIB
1.3.6.1.4.1.9.9.1300.1.2.1cdsmrInstTableEntryCISCO-ITP-DSMR-MIB
1.3.6.1.4.1.9.9.1300.1.2.1.19cdsmrInstDestSignalErrorsCISCO-ITP-DSMR-MIB