All MIBs › CISCO-CAS-IF-EXT-MIB › ccasIfExtVoiceCfgCasProfile
ccasIfExtVoiceCfgCasProfile
Module: CISCO-CAS-IF-EXT-MIB
OID (symbolic): CISCO-CAS-IF-EXT-MIB::ccasIfExtVoiceCfgCasProfile
OID (numeric): 1.3.6.1.4.1.9.9.314.1.1.1.1.22
Node type: OBJECT-TYPE
Type: Gauge
Access: read-write
Description: This object specifies the index of CAS profile that is used by this DS0 group. The value of this object is ccasProfileIndex in ccasIfExtProfileTable. This object is applicable only when the DS0 group is in a DS1 line whose signal mode is configured for CAS signaling, which means the dsx1SignalMode of the DS1 line is set to 'robbedBit(2)' for T1, or 'bitOriented(3)' for E1. If the DS1 is not configured for CAS and if the CAS profile index, ccasIfExtDs0GrpCasProfile is specified, the set operation will be rejected, and if it were not specified, it will default to a value 0. When the DS1 line is configured for CAS signaling, all the DS0 channels (ccasGrpCfgDs0Channels) in the DS1 line must be in one and only one DS0 group. If the DS1 is configured for CAS and if the CAS profile index, ccasIfExtDs0GrpCasProfile is not specified, the default CAS profile is 1.
What is ccasIfExtVoiceCfgCasProfile?
Read-write setting specifying the CAS (Channel Associated Signaling) profile index used by a DS0 group, applicable only when the parent DS1 line is configured for CAS signaling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.314.1.1.1.1.22 snmpwalk -v2c -c public <target> CISCO-CAS-IF-EXT-MIB::ccasIfExtVoiceCfgCasProfile
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.314.1.1.1.1.22.1 snmpget -v2c -c public <target> CISCO-CAS-IF-EXT-MIB::ccasIfExtVoiceCfgCasProfile.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.314.1.1.1.1.22.1 i <value>
Start monitoring Cisco media gateways / voice gateway routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CAS-IF-EXT-MIB::ccasIfExtVoiceCfgCasProfile OID value, configure state conditions and alerts, and monitor any Cisco media gateways / voice gateway routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.314 | ciscoCasIfExtMIB | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1 | ciscoCasIfExtMIBObjects | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1.1 | ccasIfExtConfig | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1.1.1 | ccasIfExtVoiceCfgTable | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1.1.1.1 | ccasIfExtVoiceCfgEntry | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1.1.1.1.22 | ccasIfExtVoiceCfgCasProfile | CISCO-CAS-IF-EXT-MIB |