All MIBs › CISCO-CAS-IF-EXT-MIB › ccasIfExtDs0GrpRepetition
ccasIfExtDs0GrpRepetition
Module: CISCO-CAS-IF-EXT-MIB
OID (symbolic): CISCO-CAS-IF-EXT-MIB::ccasIfExtDs0GrpRepetition
OID (numeric): 1.3.6.1.4.1.9.9.314.1.1.3.1.1
Node type: OBJECT-TYPE
Type: ConfigIterator
Access: read-write
Description: This object is used to repeatedly apply the writable objects of ccasIfExtDs0GrpCfgTable specified in the same SNMP PDU starting from the row specifies by the index of the instance for the number of rows specified in this object.
The repetition operation works differently for different DS0 channel bitmap configuration. When the DS0 channel bitmap is configured to contain a single DS0 channel, the order of operation is iterated through the value of DS0 group and the logical order of DS0 channel; When the DS0 channel bitmap is configured to contain more than one DS0 channels, the order of operation is iterated through logical order of DS1 channel, and all the iteration operations use the same DS0 channel bitmap configuration.
The repetition iteration will stop once the value of iterated value reaches its maximum limit. In the case of a single DS0 channel configuration, the repetition will stop when either the value of the DS0 group or the DS0 channel has reached its maximum. For multiple DS0 channel configuration, the repetition will stop once the value of DS1 reaches its maximum.
What is ccasIfExtDs0GrpRepetition?
This works like ccasIfExtVoiceCfgRepetition but applies to the ccasIfExtDs0GrpCfgTable, bulk-replicating a just-set row's writable values across a specified number of DS0 group rows, with the iteration order depending on whether the group's DS0 channel bitmap spans a single channel or multiple. The behavior difference matters operationally: on multi-channel DS0 groups the repetition follows a different traversal than on single-channel groups, so an admin scripting bulk provisioning needs to know which channel-bitmap mode a trunk uses before relying on this object to configure it predictably. Provisioning a T1 trunk configured with single-channel DS0 groups, an admin might set this to 24 to push one group's settings across all 24 channels in one Set operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.314.1.1.3.1.1 snmpwalk -v2c -c public <target> CISCO-CAS-IF-EXT-MIB::ccasIfExtDs0GrpRepetition
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.314.1.1.3.1.1.1 snmpget -v2c -c public <target> CISCO-CAS-IF-EXT-MIB::ccasIfExtDs0GrpRepetition.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.314.1.1.3.1.1.1 s <value>
Start monitoring Cisco media gateways / voice gateway routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CAS-IF-EXT-MIB::ccasIfExtDs0GrpRepetition OID value, configure state conditions and alerts, and monitor any Cisco media gateways / voice gateway routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.314 | ciscoCasIfExtMIB | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1 | ciscoCasIfExtMIBObjects | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1.1 | ccasIfExtConfig | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1.1.3 | ccasIfExtDs0GrpCfgTable | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1.1.3.1 | ccasIfExtDs0GrpCfgEntry | CISCO-CAS-IF-EXT-MIB |
| 1.3.6.1.4.1.9.9.314.1.1.3.1.1 | ccasIfExtDs0GrpRepetition | CISCO-CAS-IF-EXT-MIB |