CISCO-CAS-IF-EXT-MIB :: ccasGCnfLineSigType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-CAS-IF-EXT-MIBccasGCnfLineSigType

ccasGCnfLineSigType

Module: CISCO-CAS-IF-EXT-MIB

OID (symbolic): CISCO-CAS-IF-EXT-MIB::ccasGCnfLineSigType

OID (numeric): 1.3.6.1.4.1.9.9.314.1.6.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the line signaling type that will be used for the R2 line signaling. . digital (1): The digital line signaling is typically used for PCM systems. Only A and B bits are used to indicate line signaling states, while C and D bits may be optionally used. . analog (2): The analog line signaling is typically used for carrier systems. Only A bit is used to represent tone-on and tone-off indication to signal the line signaling states, while the B, C, and D bit are fixed. . pulse (3): The Pulse type line signaling is typically used for satellite links. It uses tones sent as pulses to indicate line signaling states.

What is ccasGCnfLineSigType?

This read-write setting selects the line signaling type (e.g., digital using only A/B bits) used for R2 line signaling on the interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.314.1.6.1.1.5
snmpwalk -v2c -c public <target> CISCO-CAS-IF-EXT-MIB::ccasGCnfLineSigType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.314.1.6.1.1.5.1
snmpget -v2c -c public <target> CISCO-CAS-IF-EXT-MIB::ccasGCnfLineSigType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.314.1.6.1.1.5.1 i <value>

Start monitoring Cisco media gateways / voice gateway routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CAS-IF-EXT-MIB::ccasGCnfLineSigType OID value, configure state conditions and alerts, and monitor any Cisco media gateways / voice gateway routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.314ciscoCasIfExtMIBCISCO-CAS-IF-EXT-MIB
1.3.6.1.4.1.9.9.314.1ciscoCasIfExtMIBObjectsCISCO-CAS-IF-EXT-MIB
1.3.6.1.4.1.9.9.314.1.6ccasIfExtGeneralConfigCISCO-CAS-IF-EXT-MIB
1.3.6.1.4.1.9.9.314.1.6.1ccasIfExtGeneralConfigTableCISCO-CAS-IF-EXT-MIB
1.3.6.1.4.1.9.9.314.1.6.1.1ccasIfExtGeneralConfigEntryCISCO-CAS-IF-EXT-MIB
1.3.6.1.4.1.9.9.314.1.6.1.1.5ccasGCnfLineSigTypeCISCO-CAS-IF-EXT-MIB