All MIBs › CIENA-CES-MCAST-FILTER-MIB › cienaCesMcastIgmpSnoopProxyQueryInterval
cienaCesMcastIgmpSnoopProxyQueryInterval
Module: CIENA-CES-MCAST-FILTER-MIB
OID (symbolic): CIENA-CES-MCAST-FILTER-MIB::cienaCesMcastIgmpSnoopProxyQueryInterval
OID (numeric): 1.3.6.1.4.1.1271.2.1.37.1.1.5.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The interval period between each general query sent to the router. This parameter specifies how often to repeat the group specific query. Default value is 125 seconds. Note that the actual rate may be slower when the switch becomes busy, so this parameter should be thought of as a minimum time interval.
What is cienaCesMcastIgmpSnoopProxyQueryInterval?
This sets how often the device's IGMP proxy sends general queries downstream to discover which receivers still want each multicast group, with a default of 125 seconds matching the standard IGMP querier interval. An admin wanting faster detection of receivers leaving a group, at the cost of more query traffic, could shorten this from the 125-second default, though the description notes actual timing may slip longer under heavy switch load. A value of 60 would have the device querying twice as often as the default, tightening how quickly stale group memberships get cleaned up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.37.1.1.5.1.3 snmpwalk -v2c -c public <target> CIENA-CES-MCAST-FILTER-MIB::cienaCesMcastIgmpSnoopProxyQueryInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.37.1.1.5.1.3.1 snmpget -v2c -c public <target> CIENA-CES-MCAST-FILTER-MIB::cienaCesMcastIgmpSnoopProxyQueryInterval.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-MCAST-FILTER-MIB::cienaCesMcastIgmpSnoopProxyQueryInterval OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.37 | cienaCesMcastFilterMIB | CIENA-CES-MCAST-FILTER-MIB |
| 1.3.6.1.4.1.1271.2.1.37.1 | cienaCesMcastFilterMIBObjects | CIENA-CES-MCAST-FILTER-MIB |
| 1.3.6.1.4.1.1271.2.1.37.1.1 | cienaCesMcastFilterConfig | CIENA-CES-MCAST-FILTER-MIB |
| 1.3.6.1.4.1.1271.2.1.37.1.1.5 | cienaCesMcastIgmpSnoopTable | CIENA-CES-MCAST-FILTER-MIB |
| 1.3.6.1.4.1.1271.2.1.37.1.1.5.1 | cienaCesMcastIgmpSnoopEntry | CIENA-CES-MCAST-FILTER-MIB |
| 1.3.6.1.4.1.1271.2.1.37.1.1.5.1.3 | cienaCesMcastIgmpSnoopProxyQueryInterval | CIENA-CES-MCAST-FILTER-MIB |