| OID symbolic | OID numeric | Type | Access | Description |
|---|
| lucent | 1.3.6.1.4.1.1751 | | | The MIB module for Lucent Policy Enabled CajunRules Products. |
| mibs | 1.3.6.1.4.1.1751.2 | | | |
| cajunRulesMIB | 1.3.6.1.4.1.1751.2.42 | | | |
| policyCapabilityMIB | 1.3.6.1.4.1.1751.2.42.1 | | | |
| lucentDevicePolicyCapabilities | 1.3.6.1.4.1.1751.2.42.1.1 | | | |
| lucentDevicePolicyCapabilityTable | 1.3.6.1.4.1.1751.2.42.1.1.1 | | not-accessible | This table is used to advertise the Policy Capabilities
of the Device. |
| lucentDevicePolicyCapabilityEntry | 1.3.6.1.4.1.1751.2.42.1.1.1.1 | | not-accessible | Information Describing a single Policy Capability of this
device. |
| I32 lucentDevicePolicyCapabilityIndex | 1.3.6.1.4.1.1751.2.42.1.1.1.1.1 | Integer32 | read-only | A unique index for this entry with no semanitics aside
from its uniqueness. |
| INT lucentDevicePolicyCapabilityType | 1.3.6.1.4.1.1751.2.42.1.1.1.1.2 | INTEGER | read-only | An enumeration describing a type of Policy attribute
supported by this device.
This Policy attribute's semantics is intended to make sense
within the context of the CajunRules application. At this
time, a value of 'ldap' indicates that the device
is retrieving policy information from an LDAP server.
This implies that the device also implements the LDAP Group
defined in this MIB.
At this time the other enumerations are informational only
and are intended for future enhancements.
It should be noted that 'snmp' indicates that the policies
themselves are being set by SNMP. The implementation of the
producer/consumer handshake defined in this MIB
in the LDAP group does NOT require the
lucentDevicePolicyCapabilityType to be set to 'snmp'.
The value 'cli' is intended for a proprietary implementation
of cli functionality implemented over some proprietary port.
This value does NOT refer to the device's implementation of a
local command line interface or a command line interface
supported over a telnet interface. |
| STR lucentDevicePolicyCapabilityDescription | 1.3.6.1.4.1.1751.2.42.1.1.1.1.3 | DisplayString | read-only | An Infomational string that should be able to be displayed
as an identifier for a user.
A recommended format would be the type followed by version
information if applicable and anything else deemed useful. |
| OCT lucentDevicePolicyCapabilityInformation | 1.3.6.1.4.1.1751.2.42.1.1.1.1.4 | OCTET STRING | read-only | An opaque string to allow for future capabilities. |
| INT lucentDevicePolicyCapabilityState | 1.3.6.1.4.1.1751.2.42.1.1.1.1.5 | INTEGER | read-only | The state of this Policy Capability. An inactive state
implies that the device has the capacity but is not using it
currently. |
| INT lucentDevicePolicyCapabilityRetrievalStatus | 1.3.6.1.4.1.1751.2.42.1.1.1.1.6 | INTEGER | read-only | Device Retrieval Status from the LDAP Server:
success - Retrieval from the LDAP server succeeded and was executed.
failedRetrieval - Failure retrieving the policy from the LDAP server.
failedExecution - Failure executing the retrieved policy.
inProgress - Retrieval from the LDAP server is still in progress.
The management station should poll the device until one of the
definitive values (success or failed) is returned. For a status of
failed-execution, examine the switch's log file to see the exact
errors. |
| INT lucentDevicePolicyCapabilityExecutionOption | 1.3.6.1.4.1.1751.2.42.1.1.1.1.7 | INTEGER | read-write | Execution Option for the policy retrieved from the LDAP Server:
stopOnError - Execution stops on the first error.
ignoreErrors - Execution continues in spite of errors; the
commands with errors are ignored. |
| DAT lucentDevicePolicyTime | 1.3.6.1.4.1.1751.2.42.1.1.2 | DateAndTime | read-only | The base time that the device would like policies to be
based upon. This field is primarily intended to allow the
device to advertise its time zone. If this time zone
is not present, or if this object is not implemented, the
client device willuse it local time zone.
Syncronization of time information other than the time zone
is best-effort. |
| lucentDevicePolicyLDAPObjects | 1.3.6.1.4.1.1751.2.42.1.2 | | | |
| IP lucentDevicePolicyLDAPServerIP | 1.3.6.1.4.1.1751.2.42.1.2.1 | IpAddress | read-write | The IP address of the LDAP enabled server this device retreives policy information
from. By convention, setting this value to 0 disables the directory enabled
capablity of this device with respect to policy. If the devices's directory enabled
capability with respect to policy is disabled locally, this object will be clearedd. |
| I32 lucentDevicePolicyLDAPServerPort | 1.3.6.1.4.1.1751.2.42.1.2.2 | Integer32 | read-write | The well-known port over which this device is using LDAP. It is assumed
that ports other than 389 might be utilized. |
| IP lucentDevicePolicySecondaryLDAPServerIP | 1.3.6.1.4.1.1751.2.42.1.2.3 | IpAddress | read-write | The backup LDAP server IP Address. |
| I32 lucentDevicePolicySecondaryLDAPServerPort | 1.3.6.1.4.1.1751.2.42.1.2.4 | Integer32 | read-write | The backup LDAP port. |
| OCT lucentDevicePolicyBadLDAPObject | 1.3.6.1.4.1.1751.2.42.1.2.5 | OCTET STRING | read-only | The last LDAP Object that was unable to be processed,
thereby causing the sending of a lucentBadLDAPObject
Notification. If this condition has never ocurred since
agent initialization, or if the device cannot 'remember',
it would be NULL. The primary purpose of this object is to
be included in the lucentBadLDAPObject Notification. |
| STR lucentDevicePolicyBadLDAPDescription | 1.3.6.1.4.1.1751.2.42.1.2.6 | DisplayString | read-only | A Descriptive string intended to provide optional detail
accompanying a lucentDadLDAPObject Notification. A likely
use of this string would be for the receiver of this variable
in a trap to display the string in an error log.
If this condition has never ocurred since agent initialization,
or if the device cannot 'remember',it would be NULL. The
primary purpose of this object is to be included in the
lucentBadLDAPObject Notification. |
| TIK lucentDevicePolicyCapabilityLastChange | 1.3.6.1.4.1.1751.2.42.1.2.7 | TimeTicks | read-only | The sysUpTime in the device that this Policy Capability
was last modified. Providing this allows a remote manager
to detect a change in the Policy Capabilities by polling a
single object. On seeing this value change an interested
manager should relearn this device's Policy Capabilities. |
| I32 lucentDevicePolicyCapabilityProducerSignal | 1.3.6.1.4.1.1751.2.42.1.2.8 | Integer32 | read-write | The sequence number assocated with the latest policy
written for this device at the directory 'pointed to'
by lucentDevicePolicyLDAPServerIP. This sequence number is
part of the Directory's Policy schema.
This object is designed for writing to by a CajunRules
like manager when it has placed a new policy for retrieval
and can be interpreted by the device as a signal to retrieve
this policy. By convention, this device would never be
written to by the agent with the exception of it
being cleared at system initializaton time. In tandem with
the lucentDevicePolicyCapabilityConsumerSignal it should
describe the current state
of the device with respect to its LDAP Policy retrieval
behavior. |
| I32 lucentDevicePolicyCapabilityConsumerSignal | 1.3.6.1.4.1.1751.2.42.1.2.9 | Integer32 | read-only | The sequence number of the last Policy retrieved from the
directory 'pointed to' by lucentDevicePolicyLDAPServerIP.
This sequence number is part of the Directory Policy
schema.
This object is initialized at zero on agent reset,
and thereafter only written by the Policy Agent on
successful retrieval and parsing of a Policy Schema
from the directory. In tandem with the
lucentDevicePolicyCapabilityConsumerSignal it should
describe the current state of the device with respect
to its LDAP Policy retrieval behavior.
By convention, the agent may set this value to 0xffff to
indicate an error serious enough to prohibit its enforcing
a retrieved policy. |
| STR lucentDevicePolicyLDAPSearchBase | 1.3.6.1.4.1.1751.2.42.1.2.10 | DisplayString | read-write | The search base string to be used by the LDAP client. |
| lucentDevicePolicyCapabilityMIBConformance | 1.3.6.1.4.1.1751.2.42.1.11 | | | |
| lucentDevicePolicyCapabilityMIBCompliances | 1.3.6.1.4.1.1751.2.42.1.12 | | | |
| lucentDevicePolicyCapabilityBasicCompliance | 1.3.6.1.4.1.1751.2.42.1.12.1 | | | The basic implementation requirements of a
policy enabled device. |
| lucentDevicePolicyMIBGroups | 1.3.6.1.4.1.1751.2.42.1.13 | | | |
| lucentDevicePolicyCapabilityGroup | 1.3.6.1.4.1.1751.2.42.1.13.1 | | | A group defining the minimum implementation of a
device instrumenting the Device Policy Capabilities
MIB. |
| lucentDevicePolicyCapabilityLDAPGroup | 1.3.6.1.4.1.1751.2.42.1.13.2 | | | A group of the Device Policy Capabilities
MIB that defines LDAP specific objects. This group is
intended to be implemented by any device that implements an
LDAP client to retrieve policy information. |
| lucentPolicyCapabilityEvents | 1.3.6.1.4.1.1751.2.42.1.21 | | | |
| lucentPolicyCapabilityEventsV2 | 1.3.6.1.4.1.1751.2.42.1.21.1 | | | The events related to Policy Capabilities. |
| NTF lucentBadLDAPObject | 1.3.6.1.4.1.1751.2.42.1.21.1.1 | | | A lucentBadLDAPObject trap indicates that
the sender has retrieved an LDAP object that it could not
process. More details can be copied to
lucentDevicePolicyBadLDAPDescription DisplayString. |
