CADANT-DQOS-GATE-MIB :: cadDQoSGateTimerT7

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCADANT-DQOS-GATE-MIBcadDQoSGateTimerT7

cadDQoSGateTimerT7

Module: CADANT-DQOS-GATE-MIB

OID (symbolic): CADANT-DQOS-GATE-MIB::cadDQoSGateTimerT7

OID (numeric): 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.20

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The CMTS MUST set the Timeout for Admitted QoS Parameters for the service flow to the value specified by this timer. The timeout for Admitted QoS Parameters limits the period of time that the CMTS must hold resources for a service flow's Admitted QoS Parameter Set while they are in excess of its Active QoS Parameter Set. See Appendix C, section C.2.2.5.7 of the DOCSIS RFI for more details on the use of this timer.

In order to allow the EMTA to refresh this timer, the CMTS MUST inform the EMTA of the Timeout for Admitted QoS Parameters value in the response (i.e. in the DSA-RSP) to the EMTA's reservation request.

The recommended default value of this timer is 200 seconds.

What is cadDQoSGateTimerT7?

Sets the T7 timeout duration (in seconds) that the CMTS enforces on admitted but not yet active QoS parameters for a service flow. If resources remain in the admitted state but unused for longer than this interval, the CMTS releases them.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.20
snmpwalk -v2c -c public <target> CADANT-DQOS-GATE-MIB::cadDQoSGateTimerT7

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.20.1
snmpget -v2c -c public <target> CADANT-DQOS-GATE-MIB::cadDQoSGateTimerT7.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.20.1 i <value>

Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-DQOS-GATE-MIB::cadDQoSGateTimerT7 OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4998cadantCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1cadObjectsCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1cadCableCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1.115cadPCMIBCADANT-CMTS-PACKETCABLE-MIB
1.3.6.1.4.1.4998.1.1.115.1cadPCMibObjectsCADANT-CMTS-PACKETCABLE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4998.1.1.115.1.2cadDQoSMibCADANT-DQOS-GATE-MIB
1.3.6.1.4.1.4998.1.1.115.1.2.1cadDQoSMibObjectsCADANT-DQOS-GATE-MIB
1.3.6.1.4.1.4998.1.1.115.1.2.1.1cadDQoSConfigBaseCADANT-DQOS-GATE-MIB
1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1cadDQoSGateTableCADANT-DQOS-GATE-MIB
1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1cadDQoSGateEntryCADANT-DQOS-GATE-MIB
1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.20cadDQoSGateTimerT7CADANT-DQOS-GATE-MIB