CADANT-CMTS-MAC-MIB :: cadIf3CmtsCmRegStatusEnergyMgtOperStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCADANT-CMTS-MAC-MIBcadIf3CmtsCmRegStatusEnergyMgtOperStatus

cadIf3CmtsCmRegStatusEnergyMgtOperStatus

Module: CADANT-CMTS-MAC-MIB

OID (symbolic): CADANT-CMTS-MAC-MIB::cadIf3CmtsCmRegStatusEnergyMgtOperStatus

OID (numeric): 1.3.6.1.4.1.4998.1.1.20.2.2.1.54

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: This attribute indicates whether the CM is currently operating in an Energy Management Mode. If this attribute returns em1x1Mode(0) bit set, the CM is operating in Energy Management 1x1 Mode. If this attribute returns all bits cleared, the CM is not operating in any Energy Management Mode. This attribute always returns 0x00 (no bits set) in the case when docsIf3CmtsCmRegStatusEnergyMgtEnabled is set to 0x00 (no Energy Management Features enabled).

What is cadIf3CmtsCmRegStatusEnergyMgtOperStatus?

This OID indicates whether a cable modem is currently using energy-saving mode (specifically 1x1 mode, which reduces power consumption). The value is a bitmask where specific bit patterns show which power-saving features are active. An ISP monitoring modems would check this to verify that battery-powered or solar-equipped customer modems are entering sleep modes as expected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.20.2.2.1.54
snmpwalk -v2c -c public <target> CADANT-CMTS-MAC-MIB::cadIf3CmtsCmRegStatusEnergyMgtOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.20.2.2.1.54.1
snmpget -v2c -c public <target> CADANT-CMTS-MAC-MIB::cadIf3CmtsCmRegStatusEnergyMgtOperStatus.1

Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-CMTS-MAC-MIB::cadIf3CmtsCmRegStatusEnergyMgtOperStatus OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4998cadantCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1cadObjectsCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1cadCableCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1.20cadLayer2CADANT-PRODUCTS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4998.1.1.20.2cadMacMibCADANT-CMTS-MAC-MIB
1.3.6.1.4.1.4998.1.1.20.2.2cadIfCmtsCmStatusTableCADANT-CMTS-MAC-MIB
1.3.6.1.4.1.4998.1.1.20.2.2.1cadIfCmtsCmStatusEntryCADANT-CMTS-MAC-MIB
1.3.6.1.4.1.4998.1.1.20.2.2.1.54cadIf3CmtsCmRegStatusEnergyMgtOperStatusCADANT-CMTS-MAC-MIB