CADANT-CMTS-MAC-MIB :: cadIf3CmtsCmRegStatusEnergyMgtCapability

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCADANT-CMTS-MAC-MIBcadIf3CmtsCmRegStatusEnergyMgtCapability

cadIf3CmtsCmRegStatusEnergyMgtCapability

Module: CADANT-CMTS-MAC-MIB

OID (symbolic): CADANT-CMTS-MAC-MIB::cadIf3CmtsCmRegStatusEnergyMgtCapability

OID (numeric): 1.3.6.1.4.1.4998.1.1.20.2.2.1.52

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: This attribute indicates the Energy Management Features the CM supports. If this attribute returns em1x1Mode(0) bit set, the CM supports the Energy Management 1x1 feature. If this attribute returns em1x1Mode(0) bit cleared, the CM does not support the Energy Management 1x1 feature. Note: This attribute only indicates if an Energy Management Feature is supported by the CM and does not indicate if the feature is enabled/disabled via the CM config file and registration request/response exchange and and does not indicate whether the CM is actively operation in an Energy Management Mode.

What is cadIf3CmtsCmRegStatusEnergyMgtCapability?

Reports the set of Energy Management features that a cable modem is capable of supporting, such as the Energy Management 1x1 mode. This allows the CMTS to know which power-saving options are available for each modem.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.20.2.2.1.52
snmpwalk -v2c -c public <target> CADANT-CMTS-MAC-MIB::cadIf3CmtsCmRegStatusEnergyMgtCapability

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4998.1.1.20.2.2.1.52.1
snmpget -v2c -c public <target> CADANT-CMTS-MAC-MIB::cadIf3CmtsCmRegStatusEnergyMgtCapability.1

Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CADANT-CMTS-MAC-MIB::cadIf3CmtsCmRegStatusEnergyMgtCapability OID value, configure state conditions and alerts, and monitor any ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4998cadantCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1cadObjectsCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1cadCableCADANT-PRODUCTS-MIB
1.3.6.1.4.1.4998.1.1.20cadLayer2CADANT-PRODUCTS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4998.1.1.20.2cadMacMibCADANT-CMTS-MAC-MIB
1.3.6.1.4.1.4998.1.1.20.2.2cadIfCmtsCmStatusTableCADANT-CMTS-MAC-MIB
1.3.6.1.4.1.4998.1.1.20.2.2.1cadIfCmtsCmStatusEntryCADANT-CMTS-MAC-MIB
1.3.6.1.4.1.4998.1.1.20.2.2.1.52cadIf3CmtsCmRegStatusEnergyMgtCapabilityCADANT-CMTS-MAC-MIB