All MIBs › CADANT-CMTS-MAC-MIB › cadEnforceRuleEnforceSCN
cadEnforceRuleEnforceSCN
Module: CADANT-CMTS-MAC-MIB
OID (symbolic): CADANT-CMTS-MAC-MIB::cadEnforceRuleEnforceSCN
OID (numeric): 1.3.6.1.4.1.4998.1.1.20.2.30.2.1.2
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-create
Description:
This attribute represents the Service Class Name from which the penalty parameter set values are derived. Must be specified. This ASCII string acts as a handle pointing to the Service Class Name In the docsQosParamSetTable. This SCN's pre-configured QoS parameters for Priority, Tmax, Tpeak, and Max Burst are used to temporarily over-write the service flow's QoS Parameter Set values whenever that service flow bandwidth exceeds the threshold.
What is cadEnforceRuleEnforceSCN?
Specifies the Service Class Name (SCN) that defines the QoS penalty parameters applied when an enforcement rule is triggered for a cable modem. This name references a pre-configured entry in the QoS parameter set table that governs the restricted service level.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.4998 | cadant | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1 | cadObjects | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1 | cadCable | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1.20 | cadLayer2 | CADANT-PRODUCTS-MIB |
| 1.3.6.1.4.1.4998.1.1.20.2 | cadMacMib | CADANT-CMTS-MAC-MIB |
| 1.3.6.1.4.1.4998.1.1.20.2.30 | cadEnforceRule | CADANT-CMTS-MAC-MIB |
| 1.3.6.1.4.1.4998.1.1.20.2.30.2 | cadEnforceRuleTable | CADANT-CMTS-MAC-MIB |
| 1.3.6.1.4.1.4998.1.1.20.2.30.2.1 | cadEnforceRuleEntry | CADANT-CMTS-MAC-MIB |
| 1.3.6.1.4.1.4998.1.1.20.2.30.2.1.2 | cadEnforceRuleEnforceSCN | CADANT-CMTS-MAC-MIB |